Chapter 4 Easy Mode
WX3310-B0 User’s Guide
27
Figure 10
Easy Mode: Status Screen (Repeater Mode)
4.1.1 What You Can Do in this Chapter
You can do the following in this mode:
• Use the
Navigation Panel
• Use the
Network Map
screen to check if your WX3310 can ping the gateway and whether it is
connected to the Internet, see
• Use the
Status
screen to view read-only information about the WX3310, including the WAN IP, MAC
address of the WX3310 and the software version, see
4.2 Navigation Panel
Use this navigation panel to opt out of the Easy mode.
Figure 11
Navigation Panel
The following table describes the labels in this screen.
Table 2 Navigation Panel
LABEL
DESCRIPTION
Logout
Click this to end the Web Configurator session.
Expert Mode
Click this to change to
Expert Mode
and customize features of the WX3310.