Chapter 6 Repeater Mode
WX3310-B0 User’s Guide
39
6.2.2 Repeater Navigation Panel
Use the menu in the navigation panel to configure WX3310 features in
Repeater Mode
.
The following screen and table show the features you can configure in
Repeater Mode
.
Figure 20
Menu (Repeater Mode)
The following table describes the sub-menus.
Mode
This shows the wireless standard the WX3310 uses.
WPS Status
This displays
Configured
when the WPS has been set up.
This displays
Unconfigured
if the WPS has not been set up.
System Status
System Up Time
This is the total time the WX3310 has been on.
Current Date/Time
This field displays your WX3310’s present
date and time.
Table 8 Status Screen (Repeater Mode)
LABEL
DESCRIPTION
Table 9 Navigation Panel (Repeater Mode)
LINK
TAB
FUNCTION
Status
Status
This screen shows the WX3310’s general device, system status information.
MONITOR
Monitor
Log
View Log
Use this screen to view the list of activities recorded by your WX3310.
Wireless
Monitor
Wireless
Monitor
Use this screen to view the wireless summary currently associated to the
WX3310.
MBSS Monitor
MBSS Monitor
Use this screen to view a summary of the Multiple Basic Server Sets (MBSS)
available on the WX3310. The MBSS allows you to use one access point to
provide several Basic Serve Sets (BSS) simultaneously.
Multicast
Monitor
Multicast
Monitor
Use this screen to view the multicast group information.
CONFIGURATION
Networking
Network
Networking
Use this screen to configure the WX3310’s LAN IPv4 and IPv6 addresses.