Chapter 7 Tutorials
WX3310-B0 User’s Guide
42
The instructions require that your hardware is connected (see the Quick Start Guide) and you are
logged into the Web Configurator through your LAN connection (see
).
1
Open the
Networking
>
AP Connection
>
AP List
screen. Select an AP form the
SSID
column. Type the
WiFi key if wireless security is enabled on the selected AP and click
Connect
.
Check the connection status to see if your WX3310 is successfully connected to the AP.
7.3.2 Selecting an AP by Manually Entering Security Information
This example shows you how to configure wireless security settings with the following parameters on your
WX3310.
Follow the steps below to create a secure wireless network by manually entering the AP’s wireless
security settings in the WX3310’s interface.
The instructions require that your hardware is connected (see the Quick Start Guide) and you are
logged into the Web Configurator through your LAN connection (see
).
1
Open the
Networking
>
AP Connection
>
Station
or
Basic
screen. Type the SSID of the AP into the
Wireless Name (SSID)
field
,
set the security settings and click
Apply
.
Check the connection status to see if your WX3310 is successfully connected to the AP.
SSID
Zyxel
Security
WPA(2)-PSK
WiFi Key
1234567890