Chapter 10 Wireless LAN
WX3310-B0 User’s Guide
60
Figure 34
Networking > Wireless Network 5G/2.4G > MAC Filter
The following table describes the labels in this menu.
10.8 MBSS Screen
A Basic Service Set (BSS) exists when all communications between wireless clients or between a wireless
client and a wired network client go through one access point (AP). For more information on BSS, see
.
A Multiple Basic Server Set (MBSS) allows you to use your WX3310 to provide several Basic Server Sets
(BSS) simultaneously. For more information on MBSS, see
Use this screen to assign varying security types to different SSIDs. Wireless clients can use different SSIDs to
associate with the same access point.
To open this screen, click
Networking
>
Wireless Network 5G/2.4G
>
MBSS
.
Table 19 Networking > Wireless Network 5G/2.4G > MAC Filter
LABEL
DESCRIPTION
Interface
Select the SSID for which you want to configure MAC filtering.
Policy
Define the filter action for the list of specified MAC addresses.
Select
None
to deactivate the MAC filtering rule you configure below.
Select
Allow
to permit access to the WX3310. MAC addresses not listed will be denied access to
the WX3310.
Select
Reject
to block access to the WX3310. MAC addresses not listed will be allowed to access
the WX3310.
MAC Address
Enter the MAC addresses of the wireless station that are allowed or denied access to the WX3310
in these address fields. Enter the MAC addresses in a valid MAC address format, that is, six
hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to begin configuring this screen afresh.