Chapter 7 Home Networking
WX3401-B0 User’s Guide
116
Subnet Mask
Type the subnet mask of your network in dotted decimal notation, for example 255.255.255.0
(factory default). Your WX3401-B0 automatically computes the subnet mask based on the IP
address you enter, so do not change this field unless you are instructed to do so.
Gateway IP
Address
Enter a gateway IPv4 address (if your ISP or network administrator gave you one) in this field.
IPv6 Setup
Select how you want to obtain an IPv6 address:
Select
Stateful
to obtain an IPv6 address using IPv6 stateful autoconfiguration.
Select
Stateless
to obtain an IPv6 address using IPv6 stateless autoconfiguration.
Select
Static
to configure a fixed IPv6 address for the WX3401-B0.
WAN IPv6
Address
Enter an IPv6 IP address that your ISP gave to you for the WAN interface.
IPv6 Gateway
Enter the IP address of the next-hop gateway. The gateway is a router or switch on the same
segment as your WX3401-B0's interfaces. The gateway helps forward packets to their
destinations.
Cancel
Click
Cancel
to restore the default or previously saved settings.
Apply
Click
Apply
to save your changes.
Table 24 Network Setting > Home Networking > LAN Setup (continued)
LABEL
DESCRIPTION
Summary of Contents for WX3401-BO
