manualshive.com logo in svg

ZyXEL Communications XGS-4728F, User Manual

The ZyXEL Communications XGS-4728F is a powerful networking device designed for high-performance data transmission. To get the most out of this product, make sure to refer to the comprehensive User Manual available for free download at 88.208.23.73:8080. The manual covers everything you need to know about utilizing the full potential of your XGS-4728F.

Share
Download
background image

 Chapter 8 Basic Setting

XGS-4728F User’s Guide

83

Use Time 
Server when 
Bootup

Type the time service protocol that your timeserver uses. Not all time 
servers support all protocols, so you may have to use trial and error to 
find a protocol that works. The main differences between them are the 
time format. 

When you select the Daytime (RFC 867) format, the Switch displays 
the day, month, year and time with no time zone adjustment. When you 
use this format, it is recommended that you use a Daytime timeserver 
within your geographical time zone. 

Time (RFC-868) format displays a 4-byte integer giving the total 
number of seconds since 1970/1/1 at 0:0:0. 

NTP (RFC-1305) is similar to Time (RFC-868). 

None is the default value. Enter the time manually. Each time you turn 
on the Switch, the time and date will be reset to 1970-1-1 0:0.

Time Server IP 
Address

Type the IP address of your timeserver. The Switch searches for the 
timeserver for up to 60 seconds. If you select a timeserver that is 
unreachable, then this screen will appear locked for 60 seconds. Please 
wait.

Current Time 

This field displays the time you open this menu (or refresh the menu).

New Time 
(hh:min:ss)

Enter the new time in hour, minute and second format. The new time 
then appears in the Current Time field after you click Apply.

Current Date

This field displays the date you open this menu.

New Date 
(yyyy-mm-dd)

Enter the new date in year, month and day format. The new date then 
appears in the Current Date field after you click Apply.

Time Zone 

Select the time difference between UTC (Universal Time Coordinated, 
formerly known as GMT, Greenwich Mean Time) and your time zone from 
the drop-down list box. 

Daylight 
Saving Time

Daylight saving is a period from late spring to early fall when many 
countries set their clocks ahead of normal local time by one hour to give 
more daytime light in the evening.

Select this option if you use Daylight Saving Time.

Start Date

Configure the day and time when Daylight Saving Time starts if you 
selected Daylight Saving Time. The time is displayed in the 24 hour 
format. Here are a couple of examples:

Daylight Saving Time starts in most parts of the United States on the 
second Sunday of March. Each time zone in the United States starts 
using Daylight Saving Time at 2 A.M. local time. So in the United States 
you would select Second, Sunday, March and 2:00.

Daylight Saving Time starts in the European Union on the last Sunday of 
March. All of the time zones in the European Union start using Daylight 
Saving Time at the same moment (1 A.M. GMT or UTC). So in the 
European Union you would select Last, Sunday, March and the last 
field depends on your time zone. In Germany for instance, you would 
select 2:00 because Germany's time zone is one hour ahead of GMT or 
UTC (GMT+1). 

Table 12   

Basic Setting > General Setup  (continued)

LABEL

DESCRIPTION

Summary of Contents for XGS-4728F











































































































































































































































































































































































































































Reviews:

No comments

Related manuals for XGS-4728F

Radial Engineering Gold Digger User Manual preview
Gold Digger
Brand: Radial Engineering Pages: 8
Radial Engineering BigShot ABY User Manual preview
BigShot ABY
Brand: Radial Engineering Pages: 2
D-Link DXS-3410 Series Hardware Installation Manual preview
DXS-3410 Series
Brand: D-Link Pages: 54
CYP PU-8H8HBTPL-4K22 Operation Manual preview
PU-8H8HBTPL-4K22
Brand: CYP Pages: 24
H3C S3100-SI Series Quick Start Manual preview
S3100-SI Series
Brand: H3C Pages: 58
Omron D4N-1A20R Datasheet preview
D4N-1A20R
Brand: Omron Pages: 16
XtendLan MATRIX1608A User Manual preview
MATRIX1608A
Brand: XtendLan Pages: 24
Eaton LPC25-16FUSE Instruction Leaflet preview
LPC25-16FUSE
Brand: Eaton Pages: 2
Cabletron Systems SmartSTACK ETHERNET ELS10-27 User Manual preview
SmartSTACK ETHERNET ELS10-27
Brand: Cabletron Systems Pages: 126
Aruba Instant On 1930 Series Installation, Safety, And Regulatory Information preview
Instant On 1930 Series
Brand: Aruba Pages: 8
ATEN Master View CS-74A User Manual preview
Master View CS-74A
Brand: ATEN Pages: 16
H3C S3100-16T P-EI-W Quick Start Manual preview
S3100-16T P-EI-W
Brand: H3C Pages: 60
Black Box LB9007A-SC-R Installation preview
LB9007A-SC-R
Brand: Black Box Pages: 2
NewStar NS-211KA User Manual preview
NS-211KA
Brand: NewStar Pages: 10
ANTAIRA LMX-2602G-SFP Series Hardware Manual preview
LMX-2602G-SFP Series
Brand: ANTAIRA Pages: 19
Vivanco SBX 95 SE - AV Control 4 Instructions Manual preview
SBX 95 SE - AV Control 4
Brand: Vivanco Pages: 16
Exsys EX-1195HMS Manual preview
EX-1195HMS
Brand: Exsys Pages: 14
I-Rocks IR-4650 Quick Installation Manual preview
IR-4650
Brand: I-Rocks Pages: 18

Brands by name

Popular brands

Load more brands