Chapter 26 AAA
XGS4600 Series User’s Guide
292
26.6.2 Supported RADIUS Attributes
Remote Authentication Dial-In User Service (RADIUS) attributes are data used to define specific
authentication elements in a user profile, which is stored on the RADIUS server. This section lists the
RADIUS attributes supported by the Switch.
Refer to RFC 2865 for more information about RADIUS attributes used for authentication.
Refer to RFC 2866 and RFC 2869 for RADIUS attributes used for accounting.
This section lists the attributes used by authentication functions on the Switch. In cases where the
attribute has a specific format associated with it, the format is specified.
26.6.3 Attributes Used for Authentication
The following sections list the attributes sent from the Switch to the RADIUS server when performing
authentication.
26.6.3.1 Attributes Used for Authenticating Privilege Access
User-Name
– The format of the User-Name attribute is
$enab
#
$
, where # is the privilege level (1 – 14).
User-Password
NAS-Identifier
NAS-IP-Address
26.6.3.2 Attributes Used to Login Users
User-Name
User-Password
NAS-Identifier
NAS-IP-Address
Table 118 Supported Tunnel Protocol Attribute
FUNCTION
ATTRIBUTE
VLAN Assignment
Tunnel-Type =
VLAN(13)
Tunnel-Medium-Type =
802(6)
Tunnel-Private-Group-ID =
VLAN ID
Note: You must also create a VLAN with the specified VID on the Switch.
Note: The bolded values in this table are fixed values as defined in RFC 3580.
