Chapter 50 OSPF
XGS4600 Series User’s Guide
460
50.8 IPv4 OSPF Virtual-Links
Configure and view virtual link settings in this screen. See
on OSPF.
In the
IPv4 OSPF Configuration
screen, click
Virtual-Link
to display the screen as shown next.
Figure 365
IP Application > OSPF > IPv4 OSPF > Configuration > Virtual-Link
The following table describes the related labels in this screen.
Key ID
When the
Authentication
field displays
MD5
, this field displays the identification number of the
key used.
Cost
This field displays the interface cost used for calculating the routing table.
Priority
This field displays the priority for this OSPF interface.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Delete
Click
Delete
to remove the selected entry from the summary table.
Cancel
Click
Cancel
to begin configuring this screen afresh.
Table 212 IP Application > OSPF > IPv4 OSPF > Configuration > Interface (continued)
LABEL
DESCRIPTION
Table 213 IP Application > OSPF > IPv4 OSPF > Configuration > Virtual-Link
LABEL
DESCRIPTION
Name
Enter a descriptive name (up to 32 printable ASCII characters) for identification purposes.
Area ID
Select the area ID (in an IP address format with dotted decimal notation) of an area to
associate the interface to that area.
Peer Router ID
Enter the ID of a peer border router.
