Chapter 54 DHCP
XGS4600 Series User’s Guide
487
54.4.2 DHCPv4 Option 82 Profile
Use this screen to create DHCPv4 option 82 profiles. Click
IP Application
>
DHCP
>
DHCPv4
in the
navigation panel and click the
Option 82 Profile
link to display the screen as shown.
Figure 389
IP Application > DHCP > DHCPv4 > Option 82 Profile
The following table describes the labels in this screen.
Table 232 IP Application > DHCP > DHCPv4 > Option 82 Profile
LABEL
DESCRIPTION
Name
Enter a descriptive name for the profile for identification purposes. You can use up to 32 ASCII
characters. Spaces are allowed.
Circuit-ID
Use this section to configure the Circuit ID sub-option to include information that is specific to
the relay agent (the Switch).
Enable
Select this option to have the Switch add the Circuit ID sub-option to client DHCP requests that it
relays to a DHCP server.
slot-port
Select this option to have the Switch add the number of port that the DHCP client is connected
to.
vlan
Select this option to have the Switch add the ID of VLAN which the port belongs to.
hostname
This is the system name you configure in the
Basic Setting
>
General Setup
screen.
Select this option for the Switch to add the system name to the client DHCP requests that it
relays to a DHCP server.
string
Enter a string of up to 64 ASCII characters that the Switch adds into the client DHCP requests.
Spaces are allowed.
Remote-ID
Use this section to configure the Remote ID sub-option to include information that identifies the
relay agent (the Switch).
Enable
Select this option to have the Switch append the Remote ID sub-option to the option 82 field of
DHCP requests.
mac
Select this option to have the Switch add its MAC address to the client DHCP requests that it
relays to a DHCP server.
string
Enter a string of up to 64 ASCII characters for the remote ID information in this field. Spaces are
allowed.
