Chapter 8 Basic Setting
XS1930 Series User’s Guide
108
The following table describes the labels in this screen.
8.10.10 IPv6 Neighbor Setup
Use this screen to create a static IPv6 neighbor entry in the Switch’s IPv6 neighbor table to store the
neighbor information permanently. Click the link next to
IPv6 Neighbor Setup
in the
IPv6 Configuration
screen to display the screen as shown next.
Table 44 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Prefix Setup
LABEL
DESCRIPTION
Interface
Select the IPv6 interface you want to configure.
Prefix
Set the IPv6 prefix that the Switch includes in router advertisements for this interface.
Prefix Length
Set the prefix length that the Switch includes in router advertisements for this interface.
Valid Lifetime
Specify how long (from 0 to 4294967295 seconds) the prefix is valid for on-link
determination.
Preferred Lifetime
Specify how long (from 0 to 4294967295 seconds) that addresses generated from the prefix
via stateless address autoconfiguration remain preferred.
The preferred lifetime cannot exceed the valid lifetime.
Flags
Select
No-Autoconfig Flag
to not allow IPv6 hosts to use this prefix for stateless address
autoconfiguration.
Select
No-Onlink Flag
to not allow the specified prefix to be used for on-link determination.
Select
No-Advertise Flag
to set the Switch to not include the specified IPv6 prefix, prefix
length in router advertisements for this interface.
Add
Click this to create a new entry or to update an existing one.
This saves your changes to the Switch’s run-time memory. The Switch loses these changes if
it is turned off or loses power, so use the
Save
link on the top navigation panel to save your
changes to the nonvolatile memory when you are done configuring.
Cancel
Click
Cancel
to begin configuring this screen afresh.
Clear
Click
Clear
to reset the fields to the factory defaults.
Index
This is the interface index number. Click on an index number to change the settings.
Interface
This is the name of the IPv6 interface you created.
Prefix/Prefix Length
This field displays the IPv6 prefix and prefix length that the Switch includes in router
advertisements for this interface.
Valid Lifetime
This field displays the IPv6 prefix valid lifetime.
Preferred Lifetime
This field displays the preferred lifetime of an IPv6 address generated from the prefix.
Delete
Check the entry(ies) that you want to remove in the
Delete
column and then click
Delete
to remove the selected entry(ies) from the summary table.
Cancel
Click
Cancel
to clear the
Delete
check boxes.
