Chapter 10 Static MAC Forward Setup
XS1930 Series User’s Guide
130
The following table describes the labels in this screen.
Table 57 Advanced Application > Static MAC Forwarding
LABEL
DESCRIPTION
Active
Select this check box to activate your rule. You may temporarily deactivate a rule without
deleting it by clearing this check box.
Name
Enter a descriptive name for identification purposes for this static MAC address forwarding rule.
MAC Address
Enter the MAC address in valid MAC address format, that is, six hexadecimal character pairs.
Note: Static MAC addresses do not age out.
VID
Enter the VLAN identification number.
Port
Enter the port where the MAC address entered in the previous field will be automatically
forwarded.
Add
Click
Add
to save your rule to the Switch’s run-time memory. The Switch loses this rule if it is turned
off or loses power, so use the
Save
link on the top navigation panel to save your changes to the
non-volatile memory when you are done configuring.
Cancel
Click
Cancel
to reset the fields to their last saved values.
Clear
Click
Clear
to begin configuring this screen afresh.
Index
Click an index number to modify a static MAC address rule for a port.
Active
This field displays whether this static MAC address forwarding rule is active (
Yes
) or not (
No
). You
may temporarily deactivate a rule without deleting it.
Name
This field displays the descriptive name for identification purposes for this static MAC address-
forwarding rule.
MAC Address
This field displays the MAC address that will be forwarded and the VLAN identification number to
which the MAC address belongs.
VID
This field displays the ID number of the VLAN group.
Port
This field displays the port where the MAC address shown in the next field will be forwarded.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the table
heading row to select all entries.
Delete
Click
Delete
to remove the selected entry from the summary table.
Cancel
Click
Cancel
to clear the check boxes.
