Chapter 21 Classifier
XS1930 Series User’s Guide
184
21.3.1 Viewing and Editing Classifier Configuration Summary
To view a summary of the classifier configuration, scroll down to the summary table at the bottom of the
Classifier
screen. To change the settings of a rule, click a number in the
Index
field.
Note: When two rules conflict with each other, a higher layer rule has priority over lower layer
rule.
Figure 132
Advanced Application > Classifier > Classifier Configuration: Summary Table
The following table describes the labels in this screen.
The following table shows some other common Ethernet types and the corresponding protocol number.
Table 83 Advanced Application > Classifier > Classifier Configuration: Summary Table
LABEL
DESCRIPTION
Index
This field displays the index number of the rule. Click an index number to edit the rule.
Active
This field displays
Yes
when the rule is activated and
No
when it is deactivated.
Weight
The field displays the priority of the rule when the match order is in
manual
mode. A higher weight
means a higher priority.
Name
This field displays the descriptive name for this rule. This is for identification purpose only.
Rule
This field displays a summary of the classifier rule’s settings.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the table
heading row to select all entries.
Delete
Click
Delete
to remove the selected entry from the summary table.
Cancel
Click
Cancel
to clear the check boxes.
Table 84 Common Ethernet Types and Protocol Numbers
ETHERNET TYPE
PROTOCOL NUMBER
IP ETHII
0800
X.75 Internet
0801
NBS Internet
0802
ECMA Internet
0803
Chaosnet
0804
X.25 Level 3
0805
XNS Compat
0807
Banyan Systems
0BAD
BBN Simnet
5208
IBM SNA
80D5
AppleTalk AARP
80F3
