Chapter 28 PPPoE
XS1930 Series User’s Guide
222
28.3.1 PPPoE IA Per-Port
Use this screen to specify whether individual ports are trusted or untrusted ports and have the Switch
add extra information to PPPoE discovery packets from PPPoE clients on a per-port basis.
Note: The Switch will drop all PPPoE packets if you enable the PPPoE Intermediate Agent on
the Switch and there are no trusted ports.
Click the
Port
link in the
Intermediate Agent
screen to display the screen as shown.
Figure 157
Advanced Application > PPPoE > Intermediate Agent > Port
The following table describes the labels in this screen.
Apply
Click
Apply
to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the
Save
link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Cancel
Click
Cancel
to begin configuring this screen afresh.
Table 107 Advanced Application > PPPoE > Intermediate Agent (continued)
LABEL
DESCRIPTION
Table 108 Advanced Application > PPPoE > Intermediate Agent > Port
LABEL
DESCRIPTION
Port
This field displays the port number. * means all ports.
*
Use this row to make the setting the same for all ports. Use this row first and then make
adjustments on a port-by-port basis.
Changes in this row are copied to all the ports as soon as you make them.