XS1930 Series User’s Guide
68
C
HAPTER
6
DHCP Relay Tutorial
6.1 Overview
This chapter provides some examples of using the web configurator to set up and use the Switch. The
tutorials include:
•
How to Use DHCPv4 Relay on the Switch
6.2 How to Use DHCPv4 Relay on the Switch
This tutorial describes how to configure your Switch to forward DHCP client requests to a specific DHCP
server. The DHCP server can then assign a specific IP address based on the information in the DHCP
requests.
6.2.1 DHCP Relay Tutorial Introduction
In this example, you have configured your DHCP server (192.168.2.3) and want to have it assign a
specific IP address (say 172.16.1.18) to DHCP client
A
based on the system name, VLAN ID and port
number in the DHCP request. Client
A
connects to the Switch’s port 2 in VLAN 102.
Figure 47
Tutorial: DHCP Relay Scenario
6.2.2 Creating a VLAN
Follow the steps below to configure port 2 as a member of VLAN 102.
