Chapter 8 Basic Setting
XS1930 Series User’s Guide
93
8.8.1 PoE Time Range Setup
Use this screen to apply a schedule to the port(s) on the Switch. You must first configure a schedule in
the
Advanced Application > Time Range
screen.
Click the
PoE Time Range Setup
link in the
Basic Setting > PoE Setup
screen. The following screen opens.
Figure 66
Basic Setting > PoE Setup > PoE Time Range Setup
The following table describes the labels in this screen.
Max Power (W)
This field displays the maximum amount of power the PD could use from the Switch on this port.
Time Range
State
This field shows whether or not the port currently receives power from the Switch according to its
schedule.
• It shows “
In
” followed by the time range name if PoE is currently enabled on the port.
• It shows “
Out
” if PoE is currently disabled on the port.
• It shows
“-”
if no schedule is applied to the port. PoE is enabled by default.
Table 31 Basic Setting > PoE Setup (continued)
LABEL
DESCRIPTION
Table 32 Basic Setting > PoE Setup > PoE Time Range Setup
LABEL
DESCRIPTION
Port Time Range Setup
Port
Enter the number of the port to which you want to apply a schedule.
