Chapter 8 Basic Setting
XS1930 Series User’s Guide
112
8.12 Cloud Management
The Zyxel Nebula Control Center (NCC) is a cloud-based network management system that allows you
to remotely manage and monitor Zyxel Nebula APs, Ethernet switches and security gateways.
The Switch is managed and provisioned automatically by the NCC (Nebula Control Center) when:
• It is connected to the Internet
• The
Nebula Control Center Discovery
feature is enabled
• It has been registered in the NCC.
This screen displays links to
Nebula Control Center Discovery
where you can have the Switch search for
the NCC (Nebula Control Center) and to
Nebula Switch Registration
which has a QR code containing
the Switch’s serial number and MAC address for handy registration of the Switch at NCC.
Click
Basic Setting
>
Cloud Management
in the navigation panel to display this screen.
Figure 82
Basic Setting > Cloud Management
8.12.1 Nebula Control Center Discovery
Click
Basic Setting
>
Cloud Management > Nebula Control Center Discovery
to display this screen.
Figure 83
Basic Setting > Cloud Management > Nebula Control Center Discovery
Select
Active
to turn on NCC discovery on the Switch. If the Switch has Internet access and has been
registered in the NCC, it will go into cloud management mode.
In cloud management mode, then NCC will first check if the firmware on the Switch needs to be
upgraded. If it does, the Switch will upgrade the firmware immediately. If the firmware doesn’t need to
be upgraded, but there is newer firmware available for the Switch, then it will be upgraded according
to the firmware upgrade schedule for the Switch on the NCC. Below is the process for upgrading
firmware:
1
Download firmware via the NCC
2
Upgrade the firmware and reboot.
Note: While the Switch is rebooting, don’t turn off the power.
Clear
Active
to turn off NCC discovery on the Switch. The Switch will not discover the NCC and remain in
standalone mode. See
for more information.
