Chapter 12 Filtering
XS1930 Series User’s Guide
136
The following table describes the related labels in this screen.
Table 59 Advanced Application > Filtering
LABEL
DESCRIPTION
Active
Make sure to select this check box to activate your rule. You may temporarily deactivate a rule
without deleting it by deselecting this check box.
Name
Type a descriptive name (up to 32 printable ASCII characters) for this rule. This is for identification
only.
Action
Select
Discard source
to drop the frames from the source MAC address (specified in the
MAC
field).
The Switch can still send frames to the MAC address.
Select
Discard destination
to drop the frames to the destination MAC address (specified in the
MAC
address). The Switch can still receive frames originating from the MAC address.
Select
Discard source
and
Discard destination
to block traffic to/from the MAC address specified in
the
MAC
field.
MAC
Type a MAC address in valid MAC address format, that is, six hexadecimal character pairs.
VID
Type the VLAN group identification number.
Add
Click
Add
to save your changes to the Switch’s run-time memory. The Switch loses these changes if
it is turned off or loses power, so use the
Save
link on the top navigation panel to save your changes
to the non-volatile memory when you are done configuring.
Cancel Click
Cancel
to reset the fields to your previous configuration.
Clear
Click
Clear
to clear the fields to the factory defaults.
Index
This field displays the index number of the rule. Click an index number to change the settings.
Active
This field displays
Yes
when the rule is activated and
No
when is it deactivated.
Name
This field displays the descriptive name for this rule. This is for identification purpose only.
MAC Address This field displays the source/destination MAC address with the VLAN identification number to
which the MAC address belongs.
VID
This field displays the VLAN group identification number.
Action
This field displays
Discard source
,
Discard destination
, or
Discard both
depending on what you
configured above.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the table
heading row to select all entries.
Delete
Check the rule(s) that you want to remove and then click the
Delete
button.
Cancel
Click
Cancel
to clear the selected checkbox(es).
