ZyAIR G-300 User’s Guide
Using the ZyAIR Utility
2-15
Table 2-3 Configuration: Privacy Configuration: Security
LABEL DESCRIPTION
Enable IEEE 802.1X
Authentication for this
network
Select this checkbox to enable IEEE 802.1X authentication to log into the
network.
EAP Type Select an EAP type. Choices are
TLS
,
PEAP
and
LEAP
.
Keys will be generated
automatically for data
privacy.
Select this checkbox to allow the ZyAIR to obtain the security keys from an
authentication server (the RADIUS server). The authentication server
automatically generates the security keys.
Pre-configured Key
(WEP)
Set the following fields when you select
WEP
in the
Encryption Mode
field.
Format for entering key Specify the key format. Select either
hexadecimal digits
or
characters
.
Key Index Select the number (1 to 4) of a key you wish to configure.
Key Length Specify the key length. Select
64 bits
or
128 bits
.
Network Key Enter the WEP keys in the fields provided.
If you select
64 bits
in the
Key Length
field.
Enter either 10 hexadecimal digits
in the range of “A-F”, “a-f” and “0-9”
(e.g. 11AA22BB33) for HEX
key type
or
Enter 5 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and
“0-9” (e.g. MyKey) for ASCII key type.
If you select
128 bits
in the
Key Length
field,
Enter either 26 hexadecimal digits
in the range of “A-F”, “a-f” and “0-9”
(for example, 00112233445566778899AABBCC) for HEX
key type
or
Enter 13 ASCII characters (case sensitive) ranging from “a-z”, “A-Z”
and “0-9” (for example, MyKey12345678) for ASCII key type.
ASCII WEP keys are case sensitive.
Select a WEP key to use for data encryption.
Confirm Network Key Enter the key again for confirmation.
Pre-Shared Key (WPA)
Set the following fields when you select
WPA-PSK
in the
Encryption Mode
field.
Summary of Contents for ZYAIR G-300
