manualshive.com logo in svg

ZyXEL Communications ZyWALL 1050, Manual

The ZyXEL Communications ZyWALL 1050 is a powerful networking device. Ensure compliance with industry standards by downloading the Declaration of Conformity from our website, completely free of charge. Access the user manual for a comprehensive guide to maximizing the potential of this product, exclusively at 88.208.23.73:8080.

Share
Download
background image

Appendix E Open Software Announcements

ZyWALL USG 1000 User’s Guide

1014

hereunder. Any rights not expressly granted by ZyXEL to you are reserved by 
ZyXEL, and all implied licenses are disclaimed.

2.Ownership

You have no ownership rights in the Software.  Rather, you have a license to use 
the Software as long as this License Agreement remains in full force and effect.  
Ownership of the Software, Documentation and all intellectual property rights 
therein shall remain at all times with ZyXEL.  Any other use of the Software by any 
other entity is strictly forbidden and is a violation of this License Agreement.

3.Copyright

The Software and Documentation contain material that is protected by 
international copyright law, trade secret law, international treaty provisions, and 
the applicable national laws of each respective country.  All rights not granted to 
you herein are expressly reserved by ZyXEL.  You may not remove any proprietary 
notice of ZyXEL or any of its licensors from any copy of the Software or 
Documentation.

4.Restrictions

You may not publish, display, disclose, sell, rent, lease, modify, store, loan, 
distribute, or create derivative works of the Software, or any part thereof. You 
may not assign, sublicense, convey or otherwise transfer, pledge as security or 
otherwise encumber the rights and licenses granted hereunder with respect to the 
Software. ZyXEL is not obligated to provide any maintenance, technical or other 
support for the resultant modified Software. You may not copy, reverse engineer, 
decompile, reverse compile, translate, adapt, or disassemble the Software, or any 
part thereof, nor shall you attempt to create the source code from the object code 
for the Software. Except as and only to the extent expressly permitted in this 
License, you may not market, co-brand, and private label or otherwise permit 
third parties to link to the Software, or any part thereof.  You may not use the 
Software, or any part thereof, in the operation of a service bureau or for the 
benefit of any other person or entity.  You may not cause, assist or permit any 
third party to do any of the foregoing. Portions of the Software utilize or include 
third party software and other copyright material. Acknowledgements, licensing 
terms and disclaimers for such material are contained in the License Notice as 
below for the third party software, and your use of such material is exclusively 
governed by their respective terms. ZyXEL has provided, as part of the Software 
package, access to certain third party software as a convenience. To the extent 
that the Software contains third party software, ZyXEL has no express or implied 
obligation to provide any technical or other support for such software other than 
compliance with the applicable license terms of such third party, and makes no 
warranty (express, implied or statutory) whatsoever with respect thereto. Please 
contact the appropriate software vendor or manufacturer directly for technical 
support and customer service related to its software and products. 

Summary of Contents for ZyWALL 1050














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ZyWALL 1050

Barracuda CloudGen Series Quick Start Manual preview
CloudGen Series
Brand: Barracuda Pages: 4
Recon Sentinel Quick Start Manual preview
Sentinel
Brand: Recon Pages: 2
NETGEAR ProSAFE FVS318G v2 Installation preview
ProSAFE FVS318G v2
Brand: NETGEAR Pages: 2
HotBrick LB-2 Setup Manual preview
LB-2
Brand: HotBrick Pages: 13

Brands by name

Popular brands

Load more brands