manualshive.com logo in svg

ZyXEL Communications ZyWALL 1050, Manual

The ZyXEL Communications ZyWALL 1050 is a powerful networking device. Ensure compliance with industry standards by downloading the Declaration of Conformity from our website, completely free of charge. Access the user manual for a comprehensive guide to maximizing the potential of this product, exclusively at 88.208.23.73:8080.

Share
Download
background image

 Chapter 36 Content Filtering

ZyWALL USG 1000 User’s Guide

639

Spyware/Malware 
Sources 

This category includes pages which distribute spyware and other 
malware. Spyware and malware are defined as software which 
takes control of your computer, modifies computer settings, 
collects or reports personal information, or misrepresents itself 
by tricking users to install, download, or enter personal 
information. This includes drive-by downloads; browser 
hijackers; dialers; intrusive advertising; any program which 
modifies your homepage, bookmarks, or security settings; and 
keyloggers. It also includes any software which bundles 
spyware (as defined above) as part of its offering. Information 
collected or reported is "personal" if it contains uniquely 
identifying data, such as e-mail addresses, name, social security 
number, IP address, etc. A site is not classified as spyware if the 
user is reasonably notified that the software will perform these 
actions (that is, it alerts that it will send personal information, 
be installed, or that it will log keystrokes). Note: Sites rated as 
spyware should have a second category assigned with them. 

Spyware Effects/
Privacy Concerns

This category includes pages to which spyware (as defined in 
the Spyware/Malware Sources category) reports its findings or 
from which it alone downloads advertisements. Also includes 
sites that contain serious privacy issues, such as “phone home” 
sites to which software can connect and send user info; sites 
that make extensive use of tracking cookies without a posted 
privacy statement; and sites to which browser hijackers redirect 
users. Usually does not include sites that can be marked as 
Spyware/Malware. Note: Sites rated as spyware effects typically 
have a second category assigned with them.

Managed Categories

These are categories of web pages based on their content. 
Select categories in this section to control access to specific 
types of Internet content.

You must have the standard content filtering license to filter 
these categories.

Adult/Mature Content

This category includes pages that contain material of adult 
nature that does not necessarily contain excessive violence, 
sexual content, or nudity. These pages include very profane or 
vulgar content and pages that are not appropriate for children.

Pornography

This category includes pages that contain sexually explicit 
material for the purpose of arousing a sexual or prurient 
interest.

Sex Education

This category includes pages that provide graphic information 
(sometimes graphic) on reproduction, sexual development, safe 
sex practices, sexuality, birth control, and sexual development.  
It also includes pages that offer tips for better sex as well as 
products used for sexual enhancement.

Intimate Apparel/
Swimsuit

This category includes pages that contain images or offer the 
sale of swimsuits or intimate apparel or other types of 
suggestive clothing.  It does not include pages selling 
undergarments as a subsection of other products offered.

Table 172   

Configuration > Anti-X > Content Filter > Filter Profile > Add (continued)

LABEL

DESCRIPTION

Summary of Contents for ZyWALL 1050














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ZyWALL 1050

Fortinet FortiGate 3600 Quick Start Manual preview
FortiGate 3600
Brand: Fortinet Pages: 2
Fortinet FortiGate 100 Administration Manual preview
FortiGate 100
Brand: Fortinet Pages: 388
D-Link DFL-210 - NetDefend - Security Appliance Log Reference Manual preview
DFL-210 - NetDefend - Security Appliance
Brand: D-Link Pages: 476
Aaeon FWS-7360 User Manual preview
FWS-7360
Brand: Aaeon Pages: 100
Lanner FW-8877 User Manual preview
FW-8877
Brand: Lanner Pages: 46
Nlynx interlynx/ts User Manual preview
interlynx/ts
Brand: Nlynx Pages: 75
Multitech RouteFinder RF850 User Manual preview
RouteFinder RF850
Brand: Multitech Pages: 194
Multitech RouteFinder RF650VPN User Manual preview
RouteFinder RF650VPN
Brand: Multitech Pages: 240
FIBER SENSYS Fiber Defender FD348R Application Note preview
Fiber Defender FD348R
Brand: FIBER SENSYS Pages: 31

Brands by name

Popular brands

Load more brands