ZyXEL Communications ZyWALL 35 Series User Manual Download

Page: 536 / 872

Chapter 30 Reports

ZyWALL 5/35/70 Series User’s Guide

536

Figure 318

REPORTS > SYSTEM REPORTS

Enabling the ZyWALL’s reporting function decreases the overall throughput by
about 1 Mbps.

The following table describes the labels in this screen.

Table 162

REPORTS > SYSTEM REPORTS

LABEL

DESCRIPTION

Collect
Statistics

Select the check box and click

Apply

to have the ZyWALL record report data.

Send Raw
Traffic Statistics
to Syslog
Server for
Analysis

Select the check box and click

Apply

to have the ZyWALL send unprocessed traffic

statistics to a syslog server for analysis.
You must have the syslog server already configured in the

Log Settings

screen.

Apply

Click

Apply

to save your changes to the ZyWALL.

Reset

Click

Reset

to begin configuring this screen afresh.

Interface

Select on which interface (

LAN

DMZ

WLAN

) the logs will be collected. The logs

on the DMZ, LAN or WLAN IP alias 1 and 2 are also recorded.

Report Type

Use the drop-down list box to select the type of reports to display.

Web Site Hits

displays the web sites that have been visited the most often from the

LAN and how many times they have been visited.

Protocol/Port

displays the protocols or service ports that have been used the most

and the amount of traffic for the most used protocols or service ports.

Host IP Address

displays the LAN, DMZ or WLAN IP addresses to and /or from

which the most traffic has been sent and how much traffic has been sent to and from
those IP addresses.

Refresh

Click

Refresh

to update the report display. The report also refreshes automatically

when you close and reopen the screen.

Flush

Click

Flush

to discard the old report data and update the report display.

Summary of Contents for ZyWALL 35 Series









































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ZyWALL 35 Series

Reviews:

Related manuals for ZyWALL 35 Series

Brands by name

Popular brands

ZyXEL Communications ZyWALL 35 Series, User Manual

Search results

Summary of Contents for ZyWALL 35 Series

Reviews:

Related manuals for ZyWALL 35 Series

Brands by name

Popular brands