ENGLISH
13
2
Use this screen to configure the gateway policy.
Name
: Enter a name to identify the gateway policy.
Remote Gateway Address
: Enter the IP address or
domain name of the remote IPSec router.
3
Use this screen to configure the network policy.
Leave the
Active
check box selected.
Name
: Enter a name to identify the network policy.
Select
Single
and enter an IP address for a single IP
address.
Select
Range IP
and enter starting and ending IP
addresses for a specific range of IP addresses.
Select
Subnet
and enter an IP address and subnet
mask to specify IP addresses on a network by their
subnet mask.