DEUTSCH
29
6 NAT
NAT (Network Address Translation - NAT, RFC 1631) ist die Übersetzung einer IP-Adresse eines Netzwerks
in eine andere IP-Adresse eines anderen Netzwerks. Wenn die ZyWALL mehrere öffentliche IP-Adressen in
mehrere private IP-Adressen Ihres LAN (oder Ihrer DMZ) übersetzen soll, verwenden Sie die Fenster
NAT
Address Mapping (NAT-Adressmapping)
.
Das folgende Beispiel zeigt den Zugriff von einem WAN- auf einen HTTP-Server (Internet) in der DMZ. Der
Server hat die private IP-Adresse 10.0.0.20.
7 Firewall
Sie können die ZyWALL verwenden, ohne die Firewall zu konfigurieren.
Die Firewall die ZyWALL ist so vorkonfiguriert, dass sie Ihr LAN vor Angriffen aus dem Internet schützt. Bei
der Standardeinstellung können keine Daten in Ihr LAN eindringen, wenn nicht zuvor eine Anfrage aus dem
LAN gestellt wurde. Die ZyWALL lässt den Zugriff vom WAN oder LAN auf die DMZ zu, blockiert aber den
Datenverkehr aus der DMZ zum LAN.
Wenn Sie die ZyWALL im Routermodus verwenden, fahren Sie mit dem nächsten Abschnitt fort. Weiter mit
dem Bridge Modus geht es in
1
Klicken Sie in der Navigationsleiste
auf
ADVANCED (ERWEITERT)
,
NAT
und dann auf
Port Forwarding
(Portweiterleitung)
.
2
Wählen Sie das Kontrollfeld
Active
(Aktiv)
.
3
Geben Sie eine Bezeichnung für die
Regel ein.
4
Geben Sie die Portnummer ein, die
der Dienst verwendet.
5
Geben Sie die IP-Adresse des
HTTP-Servers ein.
6
Klicken Sie auf
Apply
(Übernehmen)
.