manualshive.com logo in svg

ZyXEL Communications ZyWALL USG 100 Series, Manual

The ZyXEL Communications ZyWALL USG 100 Series boasts advanced security features and high-performance protection for small businesses. To unlock the full potential of this product, you can easily access the Supplementary Manual for handy instructions and support. Download this manual for free from our website today.

Share
Download
background image

 Appendix A Log Descriptions

ZyWALL USG 100/200 Series User’s Guide

1007

Interface %s is 

enabled.

An administrator enabled an interface. %s: interface name.

Interface %s is 

disabled.

An administrator disabled an interface. %s: interface name.

%s MTU > (%s MTU - 8), 

%s may not work 

correctly.

An administrator configured a PPP interface, PPP interface 
MTU > (base interface MTU - 8), PPP interface may not run 
correctly because PPP packets will be fragmented by base 
interface and the peer will not receive correct PPP packets. 
1st %s: PPP interface name, 2nd %s: ethernet interface 
name.

(%s MTU - 8) < %s MTU, 

%s may not work 

correctly.

An administrator configured ethernet, vlan or bridge and this 
interface is base interface of PPP interface. PPP interface MTU 
> (base interface MTU - 8), PPP interface may not run 
correctly because PPP packets will be fragmented by base 
interface and peer will not receive correct PPP packets.1st 
%s: Ethernet interface name, 2nd %s: PPP interface name.

Interface %s links 

down. Default route 

will not apply until 

interface %s links up.

An administrator set a static gateway in interface  but this 
interface is link down. At this time the configuration will be 
saved but route will not take effect until the link becomes 
up.1st %s: interface name, 2nd %s: interface name.

name=%s,status=%s,TxP

kts=%u,

RxPkts=%u,Colli.=%u,T

xB/s=%u,

RxB/s=%u,UpTime=%s

Port statistics log. This log will be sent to the VRPT server.

1st %s: physical port name, 2nd %s: physical port status, 1st 
%u: physical port Tx packets, 2nd %u: physical port Rx 
packets, 3rd %u: physical port packets collisions, 4th %u: 
physical port Tx Bytes/s, 5th %u: physical port Rx Bytes/s, 
3rd %s: physical port up time.

name=%s,status=%s,TxP

kts=%u,

RxPkts=%u,Colli.=%u,T

xB/s=%u,

RxB/s=%u

Interface statistics log. This log will be sent to the VRPT 
server.

1st %s: interface name, 2nd %s: interface status, 1st %u 
variable: interface Tx packets, 2nd %u variable: interface Rx 
packets, 3rd %u: interface packets collisions, 4th %u: 
interface Tx Bytes/s, 5th %u: interface Rx Bytes/s.

Interface %s start 

dailing.

A PPP or aux interface started dialing to a server. %s: 
interface name.

Interface %s connect 

failed: Connect to 

server failed.

A PPTP interface failed to connect to the PPTP server. %s: 
interface name.

Interface %s 

connection 

terminated.

A PPP or AUX connection will terminate. %s: interface name.

Interface %s 

connection 

terminated: idle 

timeout.

An idle PPP or AUX connection timed out.1%s: interface 
name.

Interface %s connect 

failed: MS-CHAPv2 

mutual authentication 

failed.

MS-CHAPv2 authentication failed (the server must support 
mS-CHAPv2 and verify that the authentication failed, this 
does not include cases where the servers does not support 
MS-CHAPv2). %s: interface name.

Table 308   

Interface Logs (continued)

LOG MESSAGE

DESCRIPTION

Summary of Contents for ZyWALL USG 100 Series






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ZyWALL USG 100 Series

Keezel keezel Detailed Instructions preview
keezel
Brand: Keezel Pages: 27
Forcepoint NGFW Quick Start Manual preview
NGFW
Brand: Forcepoint Pages: 12
Fortinet FortiGate 1U Quick Start Manual preview
FortiGate 1U
Brand: Fortinet Pages: 272
Celestix cloud edge Installation Manual preview
cloud edge
Brand: Celestix Pages: 70
PaloAlto Networks PA-5200 Seriesp Hardware Reference Manual preview
PA-5200 Seriesp
Brand: PaloAlto Networks Pages: 60
PaloAlto Networks Prisma SD-WAN ION 9000 Hardware Reference Manual preview
Prisma SD-WAN ION 9000
Brand: PaloAlto Networks Pages: 34
Huawei USG6305 Quick Start-Up preview
USG6305
Brand: Huawei Pages: 6
H3C LSUM1FWCEAB0 Manual preview
LSUM1FWCEAB0
Brand: H3C Pages: 6
Secure Computing Sidewinder 7.0 Quick Start preview
Sidewinder 7.0
Brand: Secure Computing Pages: 2
SonicWALL TZ670 Quick Start Manual preview
TZ670
Brand: SonicWALL Pages: 2
SonicWALL TZ600 Quick Start Manual preview
TZ600
Brand: SonicWALL Pages: 2
Fortinet FortiGate-3016B Quick Start Manual preview
FortiGate-3016B
Brand: Fortinet Pages: 2
Fortinet FortiGate-400A Quick Start Manual preview
FortiGate-400A
Brand: Fortinet Pages: 2
Fortinet FortiGate-1240B Quick Start Manual preview
FortiGate-1240B
Brand: Fortinet Pages: 2
Fortinet FortiGate-200A Quick Start Manual preview
FortiGate-200A
Brand: Fortinet Pages: 2
Fortinet FortiGate Voice-80C Quick Start Manual preview
FortiGate Voice-80C
Brand: Fortinet Pages: 2
Fortinet FortiGate FortiGate-800F Quick Start Manual preview
FortiGate FortiGate-800F
Brand: Fortinet Pages: 2
Fortinet FortiGate FortiGate-60B Quick Start Manual preview
FortiGate FortiGate-60B
Brand: Fortinet Pages: 2

Brands by name

Popular brands

Load more brands