manualshive.com logo in svg

ZyXEL Communications ZyWALL USG 100 Series, Manual

The ZyXEL Communications ZyWALL USG 100 Series boasts advanced security features and high-performance protection for small businesses. To unlock the full potential of this product, you can easily access the Supplementary Manual for handy instructions and support. Download this manual for free from our website today.

Share
Download
background image

 Chapter 36 Content Filtering

ZyWALL USG 100/200 Series User’s Guide

675

Spyware/Malware 
Sources 

This category includes pages which distribute spyware and other 
malware. Spyware and malware are defined as software which 
takes control of your computer, modifies computer settings, 
collects or reports personal information, or misrepresents itself 
by tricking users to install, download, or enter personal 
information. This includes drive-by downloads; browser 
hijackers; dialers; intrusive advertising; any program which 
modifies your homepage, bookmarks, or security settings; and 
keyloggers. It also includes any software which bundles 
spyware (as defined above) as part of its offering. Information 
collected or reported is "personal" if it contains uniquely 
identifying data, such as e-mail addresses, name, social security 
number, IP address, etc. A site is not classified as spyware if the 
user is reasonably notified that the software will perform these 
actions (that is, it alerts that it will send personal information, 
be installed, or that it will log keystrokes). Note: Sites rated as 
spyware should have a second category assigned with them. 

Spyware Effects/
Privacy Concerns

This category includes pages to which spyware (as defined in 
the Spyware/Malware Sources category) reports its findings or 
from which it alone downloads advertisements. Also includes 
sites that contain serious privacy issues, such as “phone home” 
sites to which software can connect and send user info; sites 
that make extensive use of tracking cookies without a posted 
privacy statement; and sites to which browser hijackers redirect 
users. Usually does not include sites that can be marked as 
Spyware/Malware. Note: Sites rated as spyware effects typically 
have a second category assigned with them.

Managed Categories

These are categories of web pages based on their content. 
Select categories in this section to control access to specific 
types of Internet content.

You must have the standard content filtering license to filter 
these categories.

Adult/Mature Content

This category includes pages that contain material of adult 
nature that does not necessarily contain excessive violence, 
sexual content, or nudity. These pages include very profane or 
vulgar content and pages that are not appropriate for children.

Pornography

This category includes pages that contain sexually explicit 
material for the purpose of arousing a sexual or prurient 
interest.

Sex Education

This category includes pages that provide graphic information 
(sometimes graphic) on reproduction, sexual development, safe 
sex practices, sexuality, birth control, and sexual development.  
It also includes pages that offer tips for better sex as well as 
products used for sexual enhancement.

Intimate Apparel/
Swimsuit

This category includes pages that contain images or offer the 
sale of swimsuits or intimate apparel or other types of 
suggestive clothing.  It does not include pages selling 
undergarments as a subsection of other products offered.

Table 181   

Configuration > Anti-X > Content Filter > Filter Profile > Add (continued)

LABEL

DESCRIPTION

Summary of Contents for ZyWALL USG 100 Series






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ZyWALL USG 100 Series

Watchguard 970 Quick Start Manual preview
970
Brand: Watchguard Pages: 8
NETGEAR ProSafe FVS114 Specifications preview
ProSafe FVS114
Brand: NETGEAR Pages: 2
Nokia Check Point IP2450 Installation Manual preview
Check Point IP2450
Brand: Nokia Pages: 136
Fortinet FortiGate 5001FA2-LENC Manual preview
FortiGate 5001FA2-LENC
Brand: Fortinet Pages: 34
Fortinet FortiGate 224B Installation Manual preview
FortiGate 224B
Brand: Fortinet Pages: 54
H3C SecPath F1000-AI-5 Series Installation Manual preview
SecPath F1000-AI-5 Series
Brand: H3C Pages: 70
Black Box MC170A Specifications preview
MC170A
Brand: Black Box Pages: 3

Brands by name

Popular brands

Load more brands