manualshive.com logo in svg

ZyXEL Communications ZyWALL USG 100 Series, Manual

The ZyXEL Communications ZyWALL USG 100 Series boasts advanced security features and high-performance protection for small businesses. To unlock the full potential of this product, you can easily access the Supplementary Manual for handy instructions and support. Download this manual for free from our website today.

Share
Download
background image

 Chapter 10 Monitor

ZyWALL USG 100/200 Series User’s Guide

259

Status

No device

 - no 3G device is connected to the ZyWALL.

Device detected

 - displays when you connect a 3G device.

Device error 

- a 3G device is connected but there is an error.

Probe device fail

 - the ZyWALL’s test of the 3G device failed.

Probe device ok

 - the ZyWALL’s test of the 3G device succeeded.

Init device fail

 - the ZyWALL was not able to initialize the 3G device.

Init device ok

 - the ZyWALL initialized the 3G card.

Check lock fail

 - the ZyWALL’s check of whether or not the 3G device 

is locked failed. 

Device locked

 - the 3G device is locked.

SIM error

 - there is a SIM card error on the 3G device.

SIM locked-PUK

 - the PUK is locked on the 3G device’s SIM card.

SIM locked-PIN

 - the PIN is locked on the 3G device’s SIM card.

Unlock PUK fail

 - Your attempt to unlock a WCDMA 3G device’s PUK 

failed because you entered an incorrect PUK. 

Unlock PIN fail 

- Your attempt to unlock a WCDMA 3G device’s PIN 

failed because you entered an incorrect PIN. 

Unlock device fail

 - Your attempt to unlock a CDMA2000 3G device 

failed because you entered an incorrect device code. 

Device unlocked

 - You entered the correct device code and unlocked 

a CDMA2000 3G device.

Get dev-info fail

 - The ZyWALL cannot get cellular device information.

Get dev-info ok

 - The ZyWALL succeeded in retrieving 3G device 

information.

Searching network

 - The 3G device is searching for a network.

Get signal fail

 - The 3G device cannot get a signal from a network.

Network found 

- The 3G device found a network.

Apply config

 - The ZyWALL is applying your configuration to the 3G 

device.

Inactive

 - The 3G interface is disabled.

Active

 - The 3G interface is enabled.

Incorrect device

 - The connected 3G device is not compatible with 

the ZyWALL.

Correct device

 - The ZyWALL detected a compatible 3G device.

Set band fail

 - Applying your band selection was not successful.

Set band ok

 - The ZyWALL successfully applied your band selection.

Set profile fail

 - Applying your ISP settings was not successful.

Set profile ok

 - The ZyWALL successfully applied your ISP settings.

PPP fail

 - The ZyWALL failed to create a PPP connection for the cellular 

interface.

Need auth-password

 - You need to enter the password for the 3G 

card in the cellular edit screen.

Device ready

 - The ZyWALL successfully applied all of your 

configuration and you can use the 3G connection. 

Service Provider This displays the name of your network service provider. This name 

may not display if the service provider has stopped service to the 3G 
SIM card. For example if the bill has not been paid or the account has 
expired. 

Cellular System

This field displays what type of cellular network the 3G connection is 
using. The network type varies depending on the 3G card you inserted 
and could be 

UMTS

, 

UMTS/HSDPA

, 

GPRS

 or 

EDGE

 when you insert a 

GSM 3G card, or 

1xRTT

, 

EVDO Rev.0

 or 

EVDO Rev.A

 when you insert 

a CDMA 3G card.

Table 40   

Monitor > System Status > Cellular Status (continued)

LABEL

DESCRIPTION

Summary of Contents for ZyWALL USG 100 Series






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ZyWALL USG 100 Series

NETGEAR ProSafe FWAG114 Reference Manual preview
ProSafe FWAG114
Brand: NETGEAR Pages: 192
Fortinet FortiGate 5050 Chassis Manual preview
FortiGate 5050
Brand: Fortinet Pages: 26
PaloAlto Networks M-300 Hardware Reference Manual preview
M-300
Brand: PaloAlto Networks Pages: 52

Brands by name

Popular brands

Load more brands