manualshive.com logo in svg

ZyXEL Communications ZyWALL USG 100 Series, Manual

The ZyXEL Communications ZyWALL USG 100 Series boasts advanced security features and high-performance protection for small businesses. To unlock the full potential of this product, you can easily access the Supplementary Manual for handy instructions and support. Download this manual for free from our website today.

Share
Download
background image

Chapter 39 Device HA

ZyWALL USG 100/200 Series User’s Guide

720

Monitored 
Interface 
Summary

This table shows the status of the device HA settings and status of the 
ZyWALL’s interfaces.

Edit

Select an entry and click this to be able to modify it. 

Activate

To turn on an entry, select it and click 

Activate

.

Inactivate

To turn off an entry, select it and click 

Inactivate

.

#

This is the entry’s index number in the list.

Status

The activate (light bulb) icon is lit when the entry is active and dimmed 
when the entry is inactive.

Interface

This field identifies the interface. At the time of writing, Ethernet and 
bridge interfaces can be included in the active-passive mode virtual 
router. The member interfaces of any bridge interfaces do not display 
separately.

Virtual Router 
IP /  Netmask

This is the master ZyWALL’s (static) IP address and subnet mask for 
this interface. If a backup takes over for the master, it uses this IP 
address. These fields are blank if the interface is a DHCP client or has 
no IP settings.

Management IP 
/ Netmask

This field displays the interface’s management IP address and subnet 
mask. You can use this IP address and subnet mask to access the 
ZyWALL whether it is in master or backup mode.

Link Status

This tells whether the monitored interface’s connection is down or up.

Synchronization Use synchronization to have a backup ZyWALL copy the master 

ZyWALL’s configuration, certificates, AV signatures, IDP and application 
patrol signatures, and system protect signatures. 

Every interface’s management IP address must be in the same subnet 
as the interface’s IP address (the virtual router IP address).

Server Address

If this ZyWALL is set to backup role, enter the IP address or Fully-
Qualified Domain Name (FQDN) of the ZyWALL from which to get 
updated configuration. Usually, you should enter the IP address or 
FQDN of a virtual router on a secure network.

If this ZyWALL is set to master role, this field displays the ZyWALL’s IP 
addresses and/or Fully-Qualified Domain Names (FQDN) through which 
ZyWALLs in backup role can get updated configuration from this 
ZyWALL.

Sync. Now

This displays if the ZyWALL is set to use active-passive mode device 
HA, the ZyWALL is in the backup role and device HA is enabled. Click 
this to copy the specified ZyWALL’s configuration.

Server Port

If this ZyWALL is set to the backup role, enter the port number to use 
for Secure FTP when synchronizing with the  specified master ZyWALL.

If this ZyWALL is set to master role, this field displays the ZyWALL’s 
Secure FTP port number. Click the link if you need to change the FTP 
port number.

Every ZyWALL in the virtual router must use the same port number. If 
the master ZyWALL changes, you have to manually change this port 
number in the backups.

Table 190   

Configuration > Device HA > Active-Passive Mode (continued)

LABEL

DESCRIPTION

Summary of Contents for ZyWALL USG 100 Series






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ZyWALL USG 100 Series

PaloAlto Networks PA-500 Reference Manual preview
PA-500
Brand: PaloAlto Networks Pages: 20
PaloAlto Networks PA-3200 Series Quick Start Manual preview
PA-3200 Series
Brand: PaloAlto Networks Pages: 2
PaloAlto Networks PA-200 Hardware Reference Manual preview
PA-200
Brand: PaloAlto Networks Pages: 20
PaloAlto Networks PA-400 Series Hardware Reference Manual preview
PA-400 Series
Brand: PaloAlto Networks Pages: 60
PaloAlto Networks PA-7050 PAN-AIRDUCT Installation Manual preview
PA-7050 PAN-AIRDUCT
Brand: PaloAlto Networks Pages: 2
Watchguard XTM 33 Hardware Manual preview
XTM 33
Brand: Watchguard Pages: 24
NetPilot NetPilot Globemaster Getting Started Manual preview
NetPilot Globemaster
Brand: NetPilot Pages: 36
Watchguard Firebox t10 Release Note preview
Firebox t10
Brand: Watchguard Pages: 24
Barracuda Networks Spam Firewall Outbound Quick Start Manual preview
Spam Firewall Outbound
Brand: Barracuda Networks Pages: 2
D-Link NetDefend DFL-860 Quick Installation Manual preview
NetDefend DFL-860
Brand: D-Link Pages: 20
D-Link NetDefend DFL-260E Quick Installation Manual preview
NetDefend DFL-260E
Brand: D-Link Pages: 32
D-Link DFL-210 - NetDefend - Security Appliance Quick Manual preview
DFL-210 - NetDefend - Security Appliance
Brand: D-Link Pages: 20
Stormshield SN2000 Installation Instructions Manual preview
SN2000
Brand: Stormshield Pages: 59
DryTek Vigor 2952 series User Manual preview
Vigor 2952 series
Brand: DryTek Pages: 811
Fortinet FortiAP 210B Quick Start Manual preview
FortiAP 210B
Brand: Fortinet Pages: 24

Brands by name

Popular brands

Load more brands