Chapter 29 Object
USG20(W)-VPN Series User’s Guide
487
Figure 327
Configuration > Object > MON Profile > Add/Edit MON Profile
The following table describes the labels in this screen.
Table 198
Configuration > Object > MON Profile > Add/Edit MON Profile
LABEL
DESCRIPTION
Activate
Select this to activate this monitor mode profile.
Profile Name
This field indicates the name assigned to the monitor mode profile.
Channel dwell time
Enter the interval (in milliseconds) before the AP switches to another channel for
monitoring.
Scan Channel Mode
Select
auto
to have the AP switch to the next sequential channel once the
Channel
dwell time
expires.
Select
manual
to set specific channels through which to cycle sequentially when the
Channel dwell time
expires. Selecting this options makes the
Scan Channel List
options available.
Country Code
Select the country where the USG is located/installed.
The available channels vary depending on the country you selected. Be sure to select
the correct/same country for both radios on an AP and all connected APs, in order to
prevent roaming failure and interference to other systems.
Summary of Contents for ZyWall USG20-VPN
Page 17: ...17 PART I User s Guide ...
Page 18: ...18 ...
Page 99: ...99 PART II Technical Reference ...
Page 100: ...100 ...
