background image

 Chapter 29 Object

USG20(W)-VPN Series User’s Guide

515

1

Tim wants to send a message to Jenny. He needs her to be sure that it comes from him, and that 
the message content has not been altered by anyone else along the way. Tim generates a public 
key pair (one public key and one private key). 

2

Tim keeps the private key and makes the public key openly available. This means that anyone who 
receives a message seeming to come from Tim can read it and verify whether it is really from him 
or not. 

3

Tim uses his private key to sign the message and sends it to Jenny.

4

Jenny receives the message and uses Tim’s public key to verify it. Jenny knows that the message is 
from Tim, and that although other people may have been able to read the message, no-one can 
have altered it (because they cannot re-sign the message with Tim’s private key).

5

Additionally, Jenny uses her own private key to sign a message and Tim uses Jenny’s public key to 
verify the message.

The USG uses certificates based on public-key cryptology to authenticate users attempting to 
establish a connection, not to encrypt the data that you send after establishing a connection. The 
method used to secure the data that you send through an established connection depends on the 
type of connection. For example, a VPN tunnel might use the triple DES encryption algorithm.

The certification authority uses its private key to sign certificates. Anyone can then use the 
certification authority’s public key to verify the certificates.

A certification path is the hierarchy of certification authority certificates that validate a certificate. 
The USG does not trust a certificate if any certificate on its path has expired or been revoked. 

Certification authorities maintain directory servers with databases of valid and revoked certificates. 
A directory of certificates that have been revoked before the scheduled expiration is called a CRL 
(Certificate Revocation List). The USG can check a peer’s certificate against a directory server’s list 
of revoked certificates. The framework of servers, software, procedures and policies that handles 
keys is called PKI (public-key infrastructure).

Advantages of Certificates

Certificates offer the following benefits.

• The USG only has to store the certificates of the certification authorities that you decide to trust, 

no matter how many devices you need to authenticate. 

• Key distribution is simple and very secure since you can freely distribute public keys and you 

never need to transmit private keys.

Self-signed Certificates

You can have the USG act as a certification authority and sign its own certificates.

Factory Default Certificate

The USG generates its own unique self-signed certificate when you first turn it on. This certificate is 
referred to in the GUI as the factory default certificate. 

Summary of Contents for ZyWall USG20-VPN












































































































































































































































































































































































































































































































































































































































































































Reviews: