Chapter 30 System
USG20(W)-VPN Series User’s Guide
581
30.12 Authentication Server
You can set the USG to work as a RADIUS server to exchange messages with a RADIUS client, such
as an AP for user authentication and authorization. Click
Configuration > System > Auth.
Server
tab. The screen appears as shown. Use this screen to enable the authentication server
feature of the USG and specify the RADIUS client’s IP address.
Figure 410
Configuration > System > Auth. Server
Move
To change an entry’s position in the numbered list, select the method and click
Move
to
display a field to type a number for where you want to put it and press [ENTER] to move
the rule to the number that you typed.
#
This the index number of the service control rule.
The entry with a hyphen (-) instead of a number is the USG’s (non-configurable) default
policy. The USG applies this to traffic that does not match any other configured rule. It is
not an editable rule. To apply other behavior, configure a rule that traffic will match so the
USG will not have to use the default policy.
Zone
This is the zone on the USG the user is allowed or denied to access.
Address
This is the object name of the IP address(es) with which the computer is allowed or denied
to access.
Action
This displays whether the computer with the IP address specified above can access the
USG zone(s) configured in the
Zone
field (
Accept
) or not (
Deny
).
Apply
Click
Apply
to save your changes back to the USG.
Reset
Click
Reset
to return the screen to its last-saved settings.
Table 248
Configuration > System > SNMP (continued)
LABEL
DESCRIPTION
Summary of Contents for ZyWall USG20-VPN
Page 17: ...17 PART I User s Guide ...
Page 18: ...18 ...
Page 99: ...99 PART II Technical Reference ...
Page 100: ...100 ...
