Chapter 6 Monitor
USG20(W)-VPN Series User’s Guide
104
The following table describes the labels in this screen.
6.3 Interface Status Screen
This screen lists all of the USG’s interfaces and gives packet statistics for them. Click
Monitor >
System Status > Interface Status
to access this screen.
Figure 89
Monitor > System Status > Interface Status
Table 33
Monitor > System Status > Port Statistics > Switch to Graphic View
LABEL
DESCRIPTION
Refresh Interval
Enter how often you want this window to be automatically updated.
Refresh Now
Click this to update the information in the window right away.
Port Selection
Select the number of the physical port for which you want to display graphics.
Switch to Grid
View
Click this to display the port statistics as a table.
bps
The y-axis represents the speed of transmission or reception.
time
The x-axis shows the time period over which the transmission or reception occurred
TX
This line represents traffic transmitted from the USG on the physical port since it was last
connected.
RX
This line represents the traffic received by the USG on the physical port since it was last
connected.
Last Update
This field displays the date and time the information in the window was last updated.
System Up Time
This field displays how long the USG has been running since it last restarted or was turned
on.
Summary of Contents for ZyWall USG20-VPN
Page 17: ...17 PART I User s Guide ...
Page 18: ...18 ...
Page 99: ...99 PART II Technical Reference ...
Page 100: ...100 ...
