Chapter 9 Interfaces
USG20(W)-VPN Series User’s Guide
200
These fields appear if the USG is a
DHCP Server
.
IP Pool Start
Address
Enter the IP address from which the USG begins allocating IP addresses. If you want to
assign a static IP address to a specific computer, click
Add Static DHCP
.
If this field is blank, the
Pool Size
must also be blank. In this case, the USG can assign
every IP address allowed by the interface’s IP address and subnet mask, except for the
first address (network address), last address (broadcast address) and the interface’s IP
address.
Pool Size
Enter the number of IP addresses to allocate. This number must be at least one and is
limited by the interface’s
Subnet Mask
. For example, if the
Subnet Mask
is
255.255.255.0 and
IP Pool Start Address
is 10.10.10.10, the USG can allocate
10.10.10.10 to 10.10.10.254, or 245 IP addresses.
If this field is blank, the
IP Pool Start Address
must also be blank. In this case, the
USG can assign every IP address allowed by the interface’s IP address and subnet
mask, except for the first address (network address), last address (broadcast address)
and the interface’s IP address.
First DNS Server
Second DNS
Server
Third DNS
Server
Specify the IP addresses up to three DNS servers for the DHCP clients to use. Use one
of the following ways to specify these IP addresses.
Custom Defined
- enter a static IP address.
From ISP
- select the DNS server that another interface received from its DHCP server.
USG
- the DHCP clients use the IP address of this interface and the USG works as a
DNS relay.
First WINS
Server, Second
WINS Server
Type the IP address of the WINS (Windows Internet Naming Service) server that you
want to send to the DHCP clients. The WINS server keeps a mapping table of the
computer names on your network and the IP addresses that they are currently using.
Default Router
If you set this interface to
DHCP Server
, you can select to use either the interface’s IP
address or another IP address as the default router. This default router will become the
DHCP clients’ default gateway.
To use another IP address as the default router, select
Custom Defined
and enter the
IP address.
Lease time
Specify how long each computer can use the information (especially the IP address)
before it has to request the information again. Choices are:
infinite
- select this if IP addresses never expire
days, hours, and minutes
- select this to enter how long IP addresses are valid.
Extended
Options
This table is available if you selected
DHCP server
.
Configure this table if you want to send more information to DHCP clients through
DHCP packets.
Add
Click this to create an entry in this table. See
Edit
Select an entry in this table and click this to modify it.
Remove
Select an entry in this table and click this to delete it.
#
This field is a sequential value, and it is not associated with any entry.
Name
This is the option’s name.
Code
This is the option’s code number.
Type
This is the option’s type.
Value
This is the option’s value.
Table 76
Configuration > Network > Interface > VLAN > Add / Edit (continued)
LABEL
DESCRIPTION
Summary of Contents for ZyWall USG20-VPN
Page 17: ...17 PART I User s Guide ...
Page 18: ...18 ...
Page 99: ...99 PART II Technical Reference ...
Page 100: ...100 ...
