Chapter 22 SSL VPN
USG20(W)-VPN Series User’s Guide
374
22.3.1 How to Upload a Custom Logo
Follow the steps below to upload a custom logo to display on the remote user SSL VPN screens.
1
Click
VPN > SSL VPN
and click the
Global Setting
tab to display the configuration screen.
2
Click
Browse
to locate the logo graphic. Make sure the file is in GIF, JPG, or PNG format.
3
Click
Apply
to start the file transfer process.
4
Log in as a user to verify that the new logo displays properly.
The following shows an example logo on the remote user screen.
SSL VPN Login Domain Name
SSL VPN Login
Domain Name 1/
2
Specify a full domain name for users to use for SSL VPN login. The domain name must be
registered to one of the USG’s IP addresses or be one of the USG’s DDNS entries. You can
specify up to two domain names so you could use one domain name for each of two WAN
ports. For example, www.zyxel.com is a fully qualified domain name where “www” is the
host.
The USG displays the normal login screen without the button for logging into the Web
Configurator.
Message
Login Message
Specify a message to display on the screen when a user logs in and an SSL VPN
connection is established successfully. You can enter up to 60 characters (0-9, a-z, A-Z,
'()+,/:=?;!*#@$_%-") with spaces allowed.
Logout Message
Specify a message to display on the screen when a user logs out and the SSL VPN
connection is terminated successfully. You can enter up to 60 characters (0-9, a-z, A-Z,
'()+,/:=?;!*#@$_%-") with spaces allowed.
Update Client
Virtual Desktop
Logo
You can upload a graphic logo to be displayed on the web browser on the remote user
computer. The ZyXEL company logo is the default logo.
Specify the location and file name of the logo graphic or click
Browse
to locate it.
Note: The logo graphic must be GIF, JPG, or PNG format. The graphic should use a
resolution of 103 x 29 pixels to avoid distortion when displayed. The USG
automatically resizes a graphic of a different resolution to 103 x 29 pixels. The file
size must be 100 kilobytes or less. Transparent background is recommended.
Browse
Click
Browse
to locate the graphic file on your computer.
Upload
Click
Upload
to transfer the specified graphic file from your computer to the USG.
Reset Logo to
Default
Click
Reset Logo to Default
to display the ZyXEL company logo on the remote user’s
web browser.
Apply
Click
Apply
to save the changes and/or start the logo file upload process.
Reset Click
Reset
to return the screen to its last-saved settings.
Table 146
VPN > SSL VPN > Global Setting (continued)
LABEL
DESCRIPTION
Summary of Contents for ZyWall USG20-VPN
Page 17: ...17 PART I User s Guide ...
Page 18: ...18 ...
Page 99: ...99 PART II Technical Reference ...
Page 100: ...100 ...