Chapter 29 Object
USG20(W)-VPN Series User’s Guide
455
29.1.2.1 Zone Edit
The
Zone Edit
screen allows you to add or edit a zone. To access this screen, go to the
Zone
Add
icon or an
Edit
icon.
Figure 306
Configuration > Object > Zone > Add
The following table describes the labels in this screen.
29.2 User/Group Overview
This section describes how to set up user accounts, user groups, and user settings for the USG. You
can also set up rules that control when users have to log in to the USG before the USG routes traffic
for them.
• The
User
) provides a summary of all user accounts.
Table 177
Configuration > Object > Zone > Add/Edit
LABEL
DESCRIPTION
Name
For a system default zone, the name is read only.
For a user-configured zone, type the name used to refer to the zone. You may use 1-31
alphanumeric characters, underscores (
_
), or dashes (-), but the first character cannot
be a number. This value is case-sensitive.
Member List
Available
lists the interfaces and VPN tunnels that do not belong to any zone. Select
the interfaces and VPN tunnels that you want to add to the zone you are editing, and
click the right arrow button to add them.
Member
lists the interfaces and VPN tunnels that belong to the zone. Select any
interfaces that you want to remove from the zone, and click the left arrow button to
remove them.
OK
Click
OK
to save your customized settings and exit this screen.
Cancel
Click
Cancel
to exit this screen without saving.
Summary of Contents for ZyWall USG20-VPN
Page 17: ...17 PART I User s Guide ...
Page 18: ...18 ...
Page 99: ...99 PART II Technical Reference ...
Page 100: ...100 ...
