Chapter 30 System
USG20(W)-VPN Series User’s Guide
588
The following table describes the fields in the ZON Utility main screen.
30.16.1 ZyXEL One Network (ZON) System Screen
Enable
ZDP
(ZON) and
Smart Connect
(Ethernet Neighbor) in the
System > ZON
screen.
See
Monitor > System Status > Ethernet Neighbor
for information on using
Smart Connect
(Link Layer Discovery Protocol (LLDP)) for discovering and configuring LLDP-aware devices in the
same broadcast domain as the USG that you’re logged into using the web configurator.
The following figure shows the
System > ZON
screen.
Figure 417
Configuration > System > ZON
The following table describes the labels in this screen.
Table 255
ZON Utility Fields
LABEL
DESCRIPTION
Type
This field displays an icon of the kind of device discovered.
Model
This field displays the model name of the discovered device.
Firmware Version
This field displays the firmware version of the discovered device.
MAC Address
This field displays the MAC address of the discovered device.
IP Address
This field displays the IP address of an internal interface on the discovered device
that first received an ZDP discovery request from the ZON utility.
System Name
This field displays the system name of the discovered device.
Location
This field displays where the discovered device is.
Status
This field displays whether changes to the discovered device have been done
successfully. As the USG does not support
IP Configuration
,
Renew IP address
and
Flash Locator LED
, this field displays “Update failed”, “Not support Renew IP
address” and “Not support Flash Locator LED” respectively.
Table 256
Configuration > System > ZON
LABEL
DESCRIPTION
ZDP
ZyXEL Discovery Protocol (ZDP) is the protocol that the ZyXEL One Network (ZON)
utility uses for discovering and configuring ZDP-aware ZyXEL devices in the same
broadcast domain as the computer on which ZON is installed.
Enable
Select to activate ZDP discovery on the USG.
Smart Connect
Smart Connect
uses Link Layer Discovery Protocol (LLDP) for discovering and
configuring LLDP-aware devices in the same broadcast domain as the USG that
you’re logged into using the web configurator.
Enable
Select to activate LLDP discovery on the USG. See also
Monitor > System Status >
Ethernet Discovery.
Summary of Contents for ZyWall USG20-VPN
Page 17: ...17 PART I User s Guide ...
Page 18: ...18 ...
Page 99: ...99 PART II Technical Reference ...
Page 100: ...100 ...
