ZyXEL Communications ZyWall USG20-VPN User Manual Download

Page: 599 / 683

Chapter 31 Log and Report

USG20(W)-VPN Series User’s Guide

599

The following table describes the labels in this screen.

31.3.4 Edit Remote Server Log Settings

The

Log Settings Edit

screen controls the detailed settings for each log in the remote server

(syslog). Go to the

Log Settings Summary

screen (see

Section 31.3.1 on page 593

), and click a

remote server

Edit

icon.

Table 260

Configuration > Log & Report > Log Setting > Edit (USB Storage)

LABEL

DESCRIPTION

USB Storage

Duplicate logs to
USB storage (if
ready)

Select this to have the USG save a copy of its system logs to a connected USB storage
device. Use the

Active Log

section to specify what kinds of messages to include.

Log Keep
duration

Enable log keep
duration

Select this and enter the number of days you want the USG to store a log in

Keep

duration

before deleting it forever from the USG.

Active Log

Selection

Use the

Selection

drop-down list to change the log settings for all of the log categories.

disable all logs

(red X) - do not send the remote server logs for any log category.

enable normal logs

(green check mark) - send the remote server log messages and

alerts for all log categories.

enable normal logs and debug logs

(yellow check mark) - send the remote server log

messages, alerts, and debugging information for all log categories.

This field is a sequential value, and it is not associated with a specific entry.

Log Category

This field displays each category of messages. The

Default

category includes debugging

messages generated by open source software.

Selection

Select what information you want to log from each

Log Category

(except

All Logs

; see

below). Choices are:

disable all logs

(red X) - do not log any information from this category

enable normal logs

(green check mark) - log regular information and alerts from this

Summary of Contents for ZyWall USG20-VPN












































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ZyWall USG20-VPN

Reviews:

Related manuals for ZyWall USG20-VPN

Brands by name

Popular brands

ZyXEL Communications ZyWall USG20-VPN, User Manual

Search results

Summary of Contents for ZyWall USG20-VPN

Reviews:

Related manuals for ZyWall USG20-VPN

Brands by name

Popular brands