background image

ZyWALL 35 User’s Guide

Chapter 41 System Maintenance Menus 8 to 10

541

Figure 343   

Call History

The following table describes the fields in this screen.

41.3  Time and Date Setting

 The Real Time Chip (RTC) keeps track of the time and date.  There is also a software 
mechanism to set the time manually or get the current time and date from an external server 
when you turn on your ZyWALL. Menu 24.10 allows you to update the time and date settings 
of your ZyWALL.

 

The real time is then displayed in

 

the ZyWALL error logs and firewall logs. 

Select menu 24 in the main menu to open 

Menu 24 - System Maintenance

, as shown next. 

              Menu 24.9.2 - Call History

    Phone Number    Dir   Rate   #call   Max   Min   Total
 1. 
 2.
 3.
 4.
 5.
 6.
 7.
 8.
 9.
10.

Enter Entry to Delete(0 to exit):

Table 206   

Call History

FIELD

DESCRIPTION

Phone Number The PPPoE service names are shown here.

Dir

This shows whether the call was incoming or outgoing.

Rate

This is the transfer rate of the call.

#call

This is the number of calls made to or received from that telephone number.

Max

This is the length of time of the longest telephone call.

Min

This is the length of time of the shortest telephone call.

Total

This is the total length of time of all the telephone calls to/from that telephone number.

You may enter an entry number to delete it or ‘”0” to exit.

Summary of Contents for ZyXEL ZyWALL 35

































































































































































































































































































































































































































































































































































































































































































































Reviews: