ZyXEL Communications ZyXEL ZyWALL 5 User Manual Download

Page: 234 / 668

ZyWALL 5 User’s Guide

232

Chapter 14 VPN Screens

Local ID Type

Select

to identify this ZyWALL by its IP address.

Select

DNS

to identify this ZyWALL by a domain name.

Select

E-mail

to identify this ZyWALL by an e-mail address.

You do not configure the local ID type and content when you set

Authentication

Key

Certificate

. The ZyWALL takes them from the certificate you select.

Content

When you select

in the

Local ID Type

field, type the IP address of your

computer in the local

Content

field. The ZyWALL automatically uses the IP

address in the

My ZyWALL

field (refer to the

My ZyWALL

field description) if you

configure the local

Content

field to

0.0.0.0

or leave it blank.

It is recommended that you type an IP address other than

0.0.0.0

in the local

Content

field or use the

DNS

E-mail

ID type in the following situations.

•

When there is a NAT router between the two IPSec routers.

•

When you want the remote IPSec router to be able to distinguish between

VPN connection requests that come in from IPSec routers with dynamic WAN

IP addresses.

When you select

DNS

E-mail

in the

Local ID Type

field, type a domain name

or e-mail address by which to identify this ZyWALL in the local

Content

field. Use

up to 31 ASCII characters including spaces, although trailing spaces are

truncated. The domain name or e-mail address is for identification purposes only

and can be any string.

Peer ID Type

Select from the following when you set

Authentication Key

Pre-shared Key

•

Select

to identify the remote IPSec router by its IP address.

•

Select

DNS

to identify the remote IPSec router by a domain name.

•

Select

E-mail

to identify the remote IPSec router by an e-mail address.

Select from the following when you set

Authentication Key

Certificate

•

Select

to identify the remote IPSec router by the IP address in the subject

alternative name field of the certificate it uses for this VPN connection.

•

Select

DNS

to identify the remote IPSec router by the domain name in the

subject alternative name field of the certificate it uses for this VPN connection.

•

Select

E-mail

to identify the remote IPSec router by the e-mail address in the

subject alternative name field of the certificate it uses for this VPN connection.

•

Select

Subject Name

to identify the remote IPSec router by the subject name

of the certificate it uses for this VPN connection.

•

Select

Any

to have the ZyWALL not check the remote IPSec router's ID.

Table 68

VPN Rules (IKE): Gateway Policy: Edit (continued)

LABEL

DESCRIPTION

Summary of Contents for ZyXEL ZyWALL 5





























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ZyXEL ZyWALL 5

Reviews:

Related manuals for ZyXEL ZyWALL 5

Brands by name

Popular brands

ZyXEL Communications ZyXEL ZyWALL 5, User Manual

Search results

Summary of Contents for ZyXEL ZyWALL 5

Reviews:

Related manuals for ZyXEL ZyWALL 5

Brands by name

Popular brands