ZyXEL Communications ZyXEL ZyWALL 5 User Manual Download

Page: 259 / 668

ZyWALL 5 User’s Guide

Chapter 15 Certificates

257

The following table describes the labels in this screen.

Table 79

My Certificate Create

LABEL

DESCRIPTION

Certificate Name

Type up to 31 ASCII characters (not including spaces) to identify this

certificate.

Subject Information

Use these fields to record information that identifies the owner of the

certificate. You do not have to fill in every field, although the

Common Name

mandatory. The certification authority may add fields (such as a serial number)

to the subject information when it issues a certificate. It is recommended that

each certificate have unique subject information.

Common Name

Select a radio button to identify the certificate’s owner by IP address, domain

name or e-mail address. Type the IP address (in dotted decimal notation),

domain name or e-mail address in the field provided. The domain name or e-

mail address can be up to 63 ASCII characters. The domain name or e-mail

address is for identification purposes only and can be any string.

Organizational Unit

Type up to 63 characters to identify the organizational unit or department to

which the certificate owner belongs. You may use any character, including

spaces, but the ZyWALL drops trailing spaces.

Organization

Type up to 63 characters to identify the company or group to which the

certificate owner belongs. You may use any character, including spaces, but

the ZyWALL drops trailing spaces.

Country

Type up to 63 characters to identify the nation where the certificate owner is

located. You may use any character, including spaces, but the ZyWALL drops

trailing spaces.

Key Length

Select a number from the drop-down list box to determine how many bits the

key should use (512 to 2048). The longer the key, the more secure it is. A

longer key also uses more PKI storage space.

Enrollment Options

These radio buttons deal with how and when the certificate is to be generated.

Create a self-signed

certificate

Select

Create a self-signed certificate

to have the ZyWALL generate the

certificate and act as the Certification Authority (CA) itself. This way you do not

need to apply to a certification authority for certificates.

Create a certification

request and save it

locally for later manual

enrollment

Select

Create a certification request and save it locally for later manual

enrollment

to have the ZyWALL generate and store a request for a certificate.

Use the

My Certificate Details

screen to view the certification request and

copy it to send to the certification authority.
Copy the certification request from the

My Certificate Details

screen (see

Section 15.8 on page 258

) and then send it to the certification authority.

Create a certification

request and enroll for

a certificate

immediately online

Select

Create a certification request and enroll for a certificate

immediately online

to have the ZyWALL generate a request for a certificate

and apply to a certification authority for a certificate.
You must have the certification authority’s certificate already imported in the

Trusted CAs

screen.

When you select this option, you must select the certification authority’s

enrollment protocol and the certification authority’s certificate from the drop-

down list boxes and enter the certification authority’s server address. You also

need to fill in the

Reference Number

and

Key

if the certification authority

requires them.

Summary of Contents for ZyXEL ZyWALL 5





























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ZyXEL ZyWALL 5

Reviews:

Related manuals for ZyXEL ZyWALL 5

Brands by name

Popular brands

ZyXEL Communications ZyXEL ZyWALL 5, User Manual

Search results

Summary of Contents for ZyXEL ZyWALL 5

Reviews:

Related manuals for ZyXEL ZyWALL 5

Brands by name

Popular brands