ZyXEL Communications ZyXEL ZyWALL 5 User Manual Download

Page: 268 / 668

ZyWALL 5 User’s Guide

266

Chapter 15 Certificates

Certification Path

Click the

Refresh

button to have this read-only text box display the end entity’s

certificate and a list of certification authority certificates that shows the hierarchy

of certification authorities that validate the end entity’s certificate. If the issuing

certification authority is one that you have imported as a trusted certification

authority, it may be the only certification authority in the list (along with the end

entity’s own certificate). The ZyWALL does not trust the end entity’s certificate

and displays “Not trusted” in this field if any certificate on the path has expired or

been revoked.

Refresh

Click

Refresh

to display the certification path.

Certificate

Information

These read-only fields display detailed information about the certificate.

Type

This field displays general information about the certificate. CA-signed means

that a Certification Authority signed the certificate. Self-signed means that the

certificate’s owner signed the certificate (not a certification authority). X.509

means that this certificate was created and signed according to the ITU-T X.509

recommendation that defines the formats for public-key certificates.

Version

This field displays the X.509 version number.

Serial Number

This field displays the certificate’s identification number given by the certification

authority.

Subject

This field displays information that identifies the owner of the certificate, such as

Common Name (CN), Organizational Unit (OU), Organization (O) and Country

(C).

Issuer

This field displays identifying information about the certificate’s issuing

certification authority, such as Common Name, Organizational Unit,

Organization and Country.
With self-signed certificates, this is the same information as in the

Subject

Name

field.

Signature Algorithm

This field displays the type of algorithm that was used to sign the certificate.

Some certification authorities use rsa-pkcs1-sha1 (RSA public-private key

encryption algorithm and the SHA1 hash algorithm). Other certification

authorities may use rsa-pkcs1-md5 (RSA public-private key encryption algorithm

and the MD5 hash algorithm).

Valid From

This field displays the date that the certificate becomes applicable. The text

displays in red and includes a Not Yet Valid! message if the certificate has not

yet become applicable.

Valid To

This field displays the date that the certificate expires. The text displays in red

and includes an Expiring! or Expired! message if the certificate is about to expire

or has already expired.

Key Algorithm

This field displays the type of algorithm that was used to generate the

certificate’s key pair (the ZyWALL uses RSA encryption) and the length of the

key set in bits (1024 bits for example).

Subject Alternative

Name

This field displays the certificate’s owner‘s IP address (IP), domain name (DNS)

or e-mail address (EMAIL).

Key Usage

This field displays for what functions the certificate’s key can be used. For

example, “DigitalSignature” means that the key can be used to sign certificates

and “KeyEncipherment” means that the key can be used to encrypt text.

Basic Constraint

This field displays general information about the certificate. For example,

Subject Type=CA means that this is a certification authority’s certificate and

“Path Length Constraint=1” means that there can only be one certification

authority in the certificate’s path.

Table 83

Trusted CA Details (continued)

LABEL

DESCRIPTION

Summary of Contents for ZyXEL ZyWALL 5





























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ZyXEL ZyWALL 5

Reviews:

Related manuals for ZyXEL ZyWALL 5

Brands by name

Popular brands

ZyXEL Communications ZyXEL ZyWALL 5, User Manual

Search results

Summary of Contents for ZyXEL ZyWALL 5

Reviews:

Related manuals for ZyXEL ZyWALL 5

Brands by name

Popular brands