Notes: Picture may be slightly different from the actual product and packaging shall be subject to change without
further notice.
Functional
Functional
Functional
Functional specification
specification
specification
specification
1. Starting up
> Insert TF Card, press power key for 2 seconds, blue LED will
be always on, then open your hand. When the product stops
to vibrate, which indicates that it turns on and enters into
Standby mode.
> Cause the difference of the capacity and data storage for the
TF Card, the camera need a few seconds to ready, so please
wait for the prompt of the vibrates.
> For the product video resolution is HD 720P, please use the
brand high-speed
(CLASS6)
TF card to avoid the recording effect
reducing or in operation.
Note: The blue indicator flash quickly when turns on without TF Card. Please turn off and insert TF card again.
2.
Mode transfer
When it turns on, press the mode transfer key short, it will circle in 4 modes:
Mode1: Manual video recording standby mode, blue indicator
will be constantly on
Mode2: Manual photo taking standby mode, red indicator will
be constantly on
Mode3: Motion-detect video recoding standby mode, blue and
yellow indicator are( motion-detect start) constantly on
together.
Mode4: Motion-detect photo taking, red and yellow ( motion-
detect ) indicator are constantly on together.
Note:
1
、
The camera will shake once after press the key which
indicates that the key is in effect, if the status indicator is
not changed immediately, please don't press it again, the
camera is saving data. It is a normal situation, please have a
little patience
2
、
When it is transferred to other modes from motion-detect
mode, the reaction will be faster if you shut out the lens.
3. Video Recording
In the manual video recording mode, press the execute key shortly, the camera will shake once, and blue indicator
flash slowly and the camera begins to record video. Press the key again, the camera will shake once and blue
indicator will be constantly on, stop to record.
Note :
