background image

1

The unit can last video recording for 20 minutes every time

and save the video automatically, and then records next

video.

2

Please open the waterproof plug for better recording effect

when not use it underwater.

3

When the TF Card was fully loaded, battery used up or stop

operated for 3 minutes, it will shut down automatically.

4. Photo Taking

In the manual photo taking standby mode, press the execute key, then please keep the camera until it vibrates, a

photo has been taken after vibration stops.

Note:

1

The red indicator will goes out when it is taking photo,

please keep it still for better photographing quality!

2

When the TF Card was fully loaded, battery used up or stop

operated for 3 minutes, it will shut down automatically.

5. Motion-detect video recording

> When it is transferred to motion-detect video recording

mode, the camera will enters into intelligent video recording

mode. When the camera captures mobile objects, it will

record video for 10 seconds and save the video

automatically, then it record next video and loop recording.

> Motion-detect recording loop coverage: when the TF Card is

fully loaded, will delete the former videos or photos

automatically to acquire the space to store new videos. If the

function is closed, the camera will power off automatically

when the storage space is fully loaded.

> Lasting time of video recording and motion-detect recording

loop coverage function can be amended by the system

settings, please refer to the system setup instruction.

Note:

1

When not use underwater, please open the waterproof

plug for better recording effect.

2

When the TF Card was fully loaded ( the loop coverage

function closed) , battery used up or stop operated for 3

minutes, it will shut down automatically.

3

Enter into this mode 3 minutes later, LED light will turn off,

the camera is still at work, press any key to instruct.

6. Motion-detect photo taking

> When it is transferred to motion-detect video recording

mode, the camera will enter into intelligent photo-taking

mode. When the camera captures mobile objects, it will

Summary of Contents for RD32














Reviews: