background image

VIDEO CASSETTE 
RECORDER

DTK4400

OWNER’S MANUAL

CAUTION: 

TO REDUCE THE RISK OF ELECTRIC 

SHOCK, DO NOT REMOVE COVER (OR BACK). 
NO USER SERVICEABLE PARTS INSIDE. REFER 
SERVICING TO QUALIFIED SERVICE PERSONNEL.

The caution marking is located on the rear of the cabinet.

The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user 
to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of suffi-
cient magnitude to constitute a risk of electric 
shock to persons.

The exclamation point within an equilateral triangle
is intended to alert the user to the presence of impor-
tant operating and maintenance (servicing) instruc-
tions in the literature accompanying the product.

CAUTION

RISK  OF ELECTRIC SHOCK

DO NOT OPEN

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, 
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT SAFEGUARDS

IMPORTANT

Use only cassettes marked VHS with this appliance.

DEW WARNING

Moisture condensation may occur inside the unit when it
is moved from a cold place to a warm place, or after
heating a cold room or under conditions of high humidity.
Do not use the VCR at least for 2 hours until its inside is
dry.

WARNING

CAUTION

To avoid fire or electric shock, do not expose this unit to
rain or moisture.

1.

Do not attempt to open the cabinet. There are no
parts inside you can service. Refer all servicing to
qualified service personnel.

2.

Slot and openings in the cabinet and at the side or
bottom are provided for ventilation. To ensure reliable
operation and to protect the unit from overheating
these opening must not be blocked or covered. Avoid
enclosed spaces such as book cases unless proper
ventilation is provided.

3.

Keep the unit away from the radiator heat sources.

4.

Avoid using near strong magnetic fields.

5.

Do not push objects of any kind into this appliance
through the cabinet slot as they could touch
dangerous voltage points or short circuit parts
resulting in a fire or electric shock.

6.

Never spill liquid of any kind on this unit. If liquid is
spilled into the unit, consult qualified service engineer.

7.

Use this unit in a horizontal (flat) position only.

PRECAUTIONS ...........................................................2

DESCRIPTION OF CONTROLS .................................2

PREPARATION FOR USE ..........................................3

SETUP .........................................................................3

PLAYBACK FUNCTION ..............................................4

RECORDING FUNCTION ...........................................5

SPECIAL FEATURES .................................................6

TROUBLESHOOTING GUIDE ....................................7

SPECIFICATIONS .......................................................7

MAINTENANCE...........................................................7

TABLE OF CONTENTS

Summary of Contents for DTK4400









Reviews: