3D Systems VisiJet PXL User Manual Download

Page: 1 / 10

User Guide VisiJet® PXL

Description

The VisiJet

line of materials oﬀers numerous capabilities to meet a variety of commercial

applications. Using the ColorJet Printing (CJP) technology, 3D Systems’ ProJet

x60 3D Printers use

the VisiJet

PXL

material set to build strong, high-deﬁnition, full color concept models, assemblies

and prototypes, for design realization, advanced communication, as well as development and

production cost reduction. Printed models beneﬁt transportation, energy, consumer products,

recreation, healthcare, education and other vertical markets. Parts can be sanded, drilled, tapped,

painted and electroplated, which further expands the options available for ﬁnished part

characteristics. Additionally, models have high- temperature resistance, ideal for digital

manufacturing and molding applications.

Features

The unique features of VisiJet® PXL include the following:

Best Color and Whiteness

• Brightest whites
• Close to 90% reproduction of CMYK colors on the ProJet® 660Pro and 860Pro
• Improved color accuracy for light tones

• Multiple Color settings on ProJet

660Pro and 860Pro for

more customized models.

Salt Water Cure™ ﬁnishing option with Epsom Salt

• Easy and user-friendly post-processing option – only water and salt are required to seal
and strengthen your monochrome printed parts

Great Versatility for all applications
Compatible with Salt Water Cure™, Wax, ColorBond

and

StrengthMax

– something for every application

Safe and Eco Friendly

Safe to dispose of waste prints and VisiJet® PXL in conventional trash.
Non-toxic
No hazardous fumes

Summary of Contents for VisiJet PXL











Search results

Summary of Contents for VisiJet PXL

Reviews:

Related manuals for VisiJet PXL

Brands by name

Popular brands

3D Systems VisiJet PXL, User Manual

Search results

Summary of Contents for VisiJet PXL

Reviews:

Related manuals for VisiJet PXL

Brands by name

Popular brands