Operations and Instruction Manual
Model #4075
Portable Concrete Anchorage Connector
ANSI Z359.1-07 5,000 lbs / 22kn
OHSA 1910.66 & 1926.502
Effective: 01/2012 Expires: 01/2022 IM-0049 REVA
1.
Follow all manufacturer’s instructions.
2.
Do not use incompatible connectors.
3.
Always inspect your units prior to use.
4.
Use the proper method of coupling to anchorage.
5.
Remove unit for service if a fall has occurred.
6.
Patch all holes with concrete when job is complete.
7.
For use by one person only.
8.
Pregnant women and minors must not use this product.
9.
Designed safe working load is 400 LBS (149.3 kg). Do not
exceed this weight.
10. Not for use with horizontal lifeline systems. Refer to item #4077.
Model #4075 SafeClaw 3/4” anchor is to be used in concrete substrate only.
DO NOT use in steel, wood or any other substrate.
This product is designed for use in cured concrete only and may be pulled in all directions up to 90.
SafeClaw Fall Protection Anchor can be placed in:
* Horizontal surfaces
* Vertical surfaces
* Overhead / ceiling surfaces
*** Warning ***
Do not use incompatible connectors with any SafeClaw Anchor.
Refer to separate instructions supplied with your anchorage connector.
Spoon
End Termination
Bushing Guide
Stop Sleeve
Trigger
Spring Swage
Anchor Loop
Heavy Duty Return Wire
3/4” SafeClaw Anchorage Connectors
3/4” SafeClaw
Fall Protection Anchor
Model - #4075
Designed safe working load: 400 lbs.
Tested - ANSI Z359.1-2007
OSHA - 1910.66 & 1926.502
Strength - 5,000 lbs / 22kn
Color coded in orange tubing
IMPORTANT
All persons using this equipment must read and understand all instructions. Failure to do so may result in serious injury or
death. If a fall occurs, the SafeClaw anchor must be disposed of according to the manufacturer instruction. Users should be
familiar with pertinent regulations governing this equipment. All individuals who use this product must be correctly
instructed on how to use this device.
