Page 1 of 2
ASSEMBLY INSTRUCTIONS
Clarity Table Lamp (Item#: 5DS153-0001)
Important Safety Instructions:
•
For safety purpose, this lamp is equipped with a polarized plug (one blade is wider than the other). If the plug does
not fit securely into your outlet, do not force it, contact a professional electrician. Never alter the plug in any way.
•
These instructions are provided for your safety. It is very important that they are read carefully and completely
before assembling fixture.
•
This fixture has been rated for up to (1)
60-watt maximum TYPE A
bulb
or (1)
13-watt compact fluorescent
light bulb
. To avoid the risk of fire, do not exceed the recommended wattage.
Pre-assembly:
Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or
hardware.
Remove all parts and hardware from box along with any plastic protective packaging.
Parts Enclosed:
Warning:
Wires and cables are all attached (further wiring is not needed from consumer). When unpacking product, be
careful to not pull wires as it may result as a bad connection. Do not plug into electrical outlet until lamp is fully
assembled.
Note:
Turn the power off (unplug from the wall outlet) before replacing the bulb. Make sure the bulb has sufficient time to cool
down.
