Page 1 of 3
ASSEMBLY INSTRUCTIONS
Crewe Resin Table Lamp (Item#5DS153-0045)
Important Safety Instructions:
For safety purpose, this lamp is equipped with a polarized plug (one blade is wider than the other). If the plug does
not fit securely into your outlet, do not force it, contact a professional electrician. Never alter the plug in any way.
These instructions are provided for your safety. It is very important that they are read carefully and completely
before assembling fixture.
This fixture has been rated for up to (1)
60-watt maximum TYPE A bulb
or (1) 1
3-watt compact fluorescent
light bulb
. To avoid the risk of fire, do not exceed the recommended wattage.
This lighting fixture is intended for indoor, residential use.
Warning:
Wires and cables are all attached (further wiring is not needed from consumer). When unpacking product, be
careful to not pull wires as it may result in a bad connection. Do not plug into electrical outlet until lamp is fully
assembled.
To reduce the risk of fire, electrical shock or personal injury, do not turn on light fixture until light bulb is installed
and assembly is complete.
Always turn off the light fixture and allow it to cool before replacing the light bulb.
Care instructions:
Wipe with soft dry cloth only
Always avoid the use of harsh chemicals or abrasives as they may damage
