NET+ Instagrid 230 V-PowerPack
QUICK GUIDE
v.1.0
1
1.
SYSTEM OVERVIEW
1. Carry handle
2. Front end cap
3. Rotary switch
4. CEE 7/X output
5. LED indicator
6. Rear end cap
7. Frame
8. AC charging input
9. NAC 3PX - TOP output
10. Housing
2.
TECHNICAL SPECIFICATIONS
3.
GENERAL INFORMATION
The NET+ Instagrid 230 V-PowerPack is a mobile energy storage and intended to power electrical
consumers. The portable power system contains lithium-ion batteries with an energy content of
less than 100 Wh each. Cells in lithium-ion batteries are gas-tight and non-hazardous, provided
the manufacturer's instructions are followed during use and handling. The user is liable for
damage stemming from improper use.
For more information, see the user manual (included with
the battery pack).
Parameter
Value
Comment
Output voltage
230 V / 50 Hz
European standard for power
quality
Nominal power
3.600 W (16 A)
RMS
Capacity
2.074 Wh
Charging time
Less than 3 h (up to 100 %) /
1.5 h (up to 50 %)
Charge input voltage
100
– 250 V / 45 – 65 Hz
Charging capacity
1.000 W (4 A)
On (idle)
150 h
230V output active, without load
Storage
> 3 years
Switch in
or
p
osition
Operating temperature
- 20 °C to 45 °C
No charging below 0 °C
Weight
19.8 kg
Including the frame
Dimensions
420 x 210 x 420 mm
Including the frame
Degree of protection (IP)
IP54+
Water- and dust-proof
Noise
< 10 dB
Noiseless, passive cooling
150% boost (>300s)
5.400 W (24 A)
RMS
200% boost (>120s)
7.200 W (32 A)
RMS
250% boost (>30s)
9.000 W (40 A)
RMS
Peak performance
18.000 W (80 A)
RMS
Output circuit breaker
16 A
E-Fuse with C characteristic
max. short-circuit current
160 A
IEC - degree of protection
Class II / double insulated
To IEC 61140
Socket
CEE 7/3 Socket (16 A)
Second socket
Neutrik powerCON TRUE1
Charging input
Neutrik powerCON TRUE1
Includes the charging cable