A&D UA-705 User Manual Download

Page: 1 / 3

1. Slide cuff onto arm so that the bottom edge of cuff

is just above the elbow crease. Then position tube

off-center toward the inner side of arm in line with

the little finger

2. Fasten the cuff tight enough so you

can slide two fingers under it.

3. Sit comfortably with arm resting on

a flat surface, palm up.

4. Press START button. (Battery installation required.

Please see manual for instructions.)

5. Your average blood pressure

reading will appear followed

by a zero, indicating that

monitor is ready for mea-

surement.

6. Press the exhaust valve until the

mark is displayed. Squeeze bulb

repeatedly until the mark dis-

appears.

7. Sit quietly during measurement.

8. Your systolic and diastolic pressure and

pulse rate will appear in the digital dis-

play.

9. Press exhaust valve on the bulb to release

remaining air from cuff after measure-

ment is complete.

UA-705 QUICK START CARD

1-888-726-9966
www.LifeSourceOnline.com

Summary of Contents for UA-705

Page 1: ...Your average blood pressure reading will appear followed by a zero indicating that monitor is ready for mea surement 6 Press the exhaust valve until the mark is displayed Squeeze bulb repeatedly unti...

Page 2: ...de presi n arterial aparecer seguida por un cero indi cando que el monitor esta listo para medir 6 Presione la v lvula de expulsi n de aire hasta que la marca est en la pantalla Presione r pidamente l...

Page 3: ...s directives 5 Votre lecture de tension art rielle moyenne appara tra suivie d un z ro indiquant que le moniteur est pr t prendre une mesure 6 Appuyez sur la soupape d chappement jusqu ce que la marqu...