Wireless Gateway RER601/603
1(4)
Quick Start Guide
User Documentation
Technical Manual and other documentation for RER601/603 are available at:
http://www.abb.com/substationautomation
Overview
This document is a short description of how to power up the Wireless Gateway RER601/603
product and how to get it operational. For further information consult the product Technical
Manual.
Physical connections and switches
Connector panel:
1. Power supply connector
2. Power switch
3. Console/application serial port (RS1)
4. Console/application port selection switch
5. Application serial port (RS2)
6. DIP switches (RS2 hardware settings)
7. I/O connector (only on RER603)
8. Ethernet connector
Antenna panel:
9. Antenna connector (FME)
10.SIM card slot
Installing SIM card
NOTE: If you have PIN code querying enabled on your SIM card, do not install the card before
setting the code. The SIM card could lock up if done otherwise. SIM card is not included.
1. Power off the RER601/603. It is recommended to turn power off while installing/removing the SIM
card.
2. Push the yellow button in the SIM card slot to eject the SIM card tray.
3. Insert the SIM card to the tray and push the SIM card tray firmly and carefully back to its holder.
ABB
www.abb.com/substationautomation
1MRS757426
Rev.
A
1
2
3
4 5
7
8
9
10
6
